DBATU TY Electrical syllabus

DBATU · Third Year B.Tech Electrical Engineering · NEP 2020

Industrial Automation & Control

26AF1293PE605C · Elective III · Semester VI · 3 credits · Continuous assessment 20 + mid-semester 20 + end-semester 60

One of the Elective III options.

All notes for this subject
  1. Unit 1: Automation in Manufacturing

    6 hours

    Automation in production; principles, strategies and elements of automated systems; levels of automation; automated flow lines and transfer mechanisms with and without storage buffers.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Types of industrial automation
    • Principles and levels of automation
    • Automated flow lines and transfer lines
  2. Unit 2: Material Handling and Identification

    6 hours

    Material handling equipment and system design; conveyors; automated guided vehicles; automated storage; interfacing handling with manufacturing; automatic identification.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Material handling systems and conveyors
    • Automated guided vehicles and storage systems
    • Automatic identification methods
  3. Unit 3: Computer-based Industrial Automation

    6 hours

    Direct digital control, DCS and SCADA architectures; SCADA in process industries: RTUs, pumping stations, flow meters, pipeline leak studies and transport automation.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Direct digital control
    • Distributed control systems
    • SCADA architecture: HMI, MTU and RTU
    • SCADA in pipelines and pumping stations
  4. Unit 4: Programmable Logic Controllers

    6 hours

    PLC block diagram and programming languages; basic instructions; alarms and interlocks; PLC networking and safety; process safety with PLCs integrated with DCS and international standards.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • PLC hardware: CPU and I/O modules
    • Ladder diagram programming
    • Alarms and interlocks in PLCs
    • PLC networking
    • Process safety automation with PLC and DCS
  5. Unit 5: Distributed Control Systems

    6 hours

    Local control unit architecture and process interfacing; security design; DCS networking; Profibus, Fieldbus and HART; data gathering, real-time analytics and historians; RTUs compared with PLCs and DCS.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • DCS local control unit architecture
    • Profibus and industrial Ethernet
    • HART and Fieldbus protocols
    • Data historians and process data analytics

Unit contents are summarised from the official DBATU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Technological University (DBATU).