DBATU TY Electrical syllabus

DBATU · Third Year B.Tech Electrical Engineering · NEP 2020

Flexible AC Transmission System

26AF1293PE605A · Elective III · Semester VI · 3 credits · Continuous assessment 20 + mid-semester 20 + end-semester 60

One of the Elective III options.

All notes for this subject
  1. Unit 1: Transmission Interconnection

    6 hours

    AC power flow and loading capability; power flow and dynamic stability of an interconnection; HVDC transmission, its components and converter configurations; DC link control: firing, current and extinction angle control and power control.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Power flow and loading capability of AC interconnections
    • HVDC versus EHVAC transmission
    • Components of an HVDC system
    • HVDC converter configurations
    • HVDC converter control: CIA, CC and CEA
  2. Unit 2: Introduction to FACTS

    6 hours

    Benefits and types of FACTS controllers; series and shunt compensation; voltage- and current-source converters; shunt compensation for midpoint voltage regulation, voltage stability and transient stability.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Need for FACTS
    • Types of FACTS controllers
    • Principles of series and shunt compensation
    • Voltage and current source converters
    • Shunt compensation for midpoint voltage and stability
  3. Unit 3: Reactive Power Control and VAR Sources

    6 hours

    Controllable VAR generation; static VAR compensators; variable-impedance VAR generators: TCR, TSC, TSC–TCR and FC–TCR.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Methods of controllable VAR generation
    • SVC
    • Thyristor-controlled reactor and thyristor-switched capacitor
  4. Unit 4: Variable-impedance Series Compensators

    6 hours

    TSSC and TCSC; switching-converter series compensators; the interline power flow controller; special-purpose controllers: voltage limiters and regulators, braking resistors and current limiters.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Thyristor-switched series capacitor
    • TCSC and SSSC
    • Interline power flow controller
    • Special-purpose FACTS controllers
  5. Unit 5: STATCOM, Series Compensators and UPFC

    6 hours

    STATCOM: principle, configuration and control; SVC versus STATCOM; objectives of series compensation; the SSSC and its control; the UPFC and independent control of real and reactive power.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • STATCOM
    • SVC versus STATCOM
    • Objectives of series compensation
    • Unified power flow controller

Unit contents are summarised from the official DBATU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Technological University (DBATU).