DBATU · Third Year B.Tech Electrical Engineering · NEP 2020
Electrical Utilization
26AF1293PE604A · Elective II · Semester VI · 3 credits · Continuous assessment 20 + mid-semester 20 + end-semester 60
One of the Elective II options.
Unit 1: Industrial Utilization of Electric Motors
7 hoursMatching motor and load characteristics; starting time and load equalisation; push buttons, limit, float and pressure switches, thermostats, contactors and solenoid valves; line diagrams; motors in mills, mines, cranes, lifts, pumps, refrigeration and marine drives.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Matching motors to mechanical loads
- Starting time and load equalisation
- Control and pilot devices for motors
- Motor applications in mills, mines, cranes and lifts
Unit 2: Electrolytic Processes
6 hoursFaraday's laws of electrolysis; electroplating, anodising, electro-polishing and electro-extraction; accumulators and cells: types, construction, charging and discharging; trends in battery manufacture.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Faraday's laws of electrolysis
- Electroplating, anodising and electro-extraction
- Batteries: charging, discharging and trends
Unit 3: Illumination
6 hoursRequirements of good lighting; lighting fittings and luminaires; designing indoor and outdoor schemes: factory, flood and street lighting.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Requirements of good lighting
- Classification of lighting fittings and luminaires
- Factory, flood and street lighting design
Unit 4: Electrical Heating and Welding
6 hoursResistance heating and oven element design and temperature control; arc and induction furnaces; dielectric heating; arc and resistance welding; ultrasonic and laser welding.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Resistance heating and oven design
- Arc and induction furnaces
- Dielectric heating
- Arc and resistance welding
- Ultrasonic and laser welding
Unit 5: Electrical Traction
6 hoursAn ideal traction system and the systems in use; train movement and speed–time curves; supply, feeding and distribution on AC traction; current collection; traction motors, tractive effort, speed control and electric braking.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Ideal traction system and traction systems
- Speed-time curves and train movement
- AC traction supply and current collection
- Traction motors and tractive effort
- Speed control and electric braking in traction
Unit contents are summarised from the official DBATU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Technological University (DBATU).