DBATU TY Electrical syllabus

DBATU · Third Year B.Tech Electrical Engineering · NEP 2020

Electrical Machine II

26AF1293PC502 · Semester V · 3 credits · Continuous assessment 20 + mid-semester 20 + end-semester 60

  1. Unit 1: Single-phase Motors

    7 hours

    Construction and the double revolving field theory; equivalent circuit; split-phase, capacitor-start and shaded-pole starting; torque–speed characteristics, performance and applications.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Double revolving field theory
    • Equivalent circuit of a single-phase induction motor
    • Starting methods and types of single-phase motors
    • Tests on single-phase induction motors
  2. Unit 2: Three-phase Induction Motors

    7 hours

    Construction, classification and the rotating magnetic field; phasor diagram and equivalent circuit; starting, full-load and maximum torque; maximum output; torque–slip characteristics; losses and efficiency.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Construction and rotating magnetic field of induction motors
    • Equivalent circuit and phasor diagram of induction motors
    • Torque equations and torque-slip characteristics
    • Losses, efficiency and maximum output
  3. Unit 3: Starters and Testing of Induction Motors

    6 hours

    Autotransformer, star–delta and rotor-resistance starters; no-load and blocked-rotor tests; performance from the equivalent circuit and the circle diagram; single phasing.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Starters for three-phase induction motors
    • No-load and blocked-rotor tests
    • Circle diagram
    • Single phasing
  4. Unit 4: Synchronous Generators

    6 hours

    Construction, ratings and winding factors; EMF equation and harmonics; armature reaction and synchronous reactance; OC and SC tests; regulation by synchronous impedance and ampere-turn methods; two-reaction theory and the slip test; synchronising and parallel operation.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Construction of synchronous machines
    • EMF equation and winding factors
    • Armature reaction
    • Synchronous reactance and phasor diagram
    • Open-circuit and short-circuit tests
    • EMF and MMF methods of regulation
    • Two-reaction theory and the slip test
    • Parallel operation of alternators
  5. Unit 5: Synchronous Motors

    6 hours

    Theory and phasor diagrams; current and power factor against excitation; hunting and its suppression; V and inverted-V curves; starting; losses and efficiency of salient and non-salient pole machines.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Torque angle and equivalent circuit
    • V curves and inverted V curves
    • Hunting
    • Starting of synchronous motors
    • Losses and efficiency of synchronous machines

Unit contents are summarised from the official DBATU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Technological University (DBATU).