DBATU · Third Year B.Tech Electrical Engineering · NEP 2020
Control System
26AF1293PC603 · Semester VI · 3 credits · Continuous assessment 20 + mid-semester 20 + end-semester 60
Unit 1: Introduction to Control Systems
7 hoursOpen- and closed-loop systems; equations and transfer functions of mechanical, rotational and electrical systems; block-diagram reduction; signal flow graphs and Mason's gain formula; negative and positive feedback and sensitivity.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Open-loop and closed-loop systems
- Modelling electrical and mechanical systems
- Transfer function, poles and zeros
- Block diagram reduction
- Signal flow graphs and Mason's gain formula
- Effect of feedback on sensitivity
Unit 2: Time-domain Analysis
7 hoursTest signals; time-domain specifications; steady-state response, system type and error constants; transient response; stability by the Routh array.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Standard test signals
- Response of first-order systems
- Response of second-order systems
- Time-domain specifications
- Steady-state error and error coefficients
- Routh-Hurwitz criterion
Unit 3: Stability and Frequency-response Analysis
7 hoursConstructing the root locus and judging stability from it; the effect of added poles and zeros; stability from Bode plots, polar plots and the Nyquist criterion.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Root locus construction
- Stability from the root locus
- Bode plots
- Polar plots
- Nyquist stability criterion
- Gain margin and phase margin
Unit 4: Compensation and Controllers
6 hoursLag, lead and lag–lead compensation; P, I and D controllers and their effect on performance; P, PI and PID control.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Lead and lag networks
- Lag-lead compensation
- P, PI and PID controllers
Unit 5: State-space Analysis
6 hoursState, state variables and state vector; forms of state representation and diagonalisation; state equations from transfer functions and back; solving state equations; the state transition matrix and the Cayley–Hamilton method; controllability and observability by Kalman's test.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- State variables and state-space representation
- State equations from transfer functions
- State transition matrix and the Cayley-Hamilton method
- Controllability and observability
Unit contents are summarised from the official DBATU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Technological University (DBATU).