DBATU · Third Year B.Tech Computer Engineering · NEP 2020
Internet of Things
26AF1245PE604 · Elective II · Semester VI · 3 credits · Continuous assessment 20 + mid-semester 20 + end-semester 60
One of the Elective II options.
Unit 1: IoT Introduction
6 hoursGenesis and impact of IoT; convergence of IT and IoT; challenges; IoT network architectures compared; the core IoT functional stack and the data-management and compute stack.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- IoT: definition, characteristics and challenges
- IoT network architecture and the functional stack
Unit 2: Smart Objects
6 hoursSensors, actuators and smart objects; sensor networks; connecting smart objects, communication criteria and IoT access technologies.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Sensors
- Actuators
- Smart objects and sensor networks
- IoT access technologies: 802.15.4, 802.11ah and LoRaWAN
Unit 3: IP Layer
6 hoursIP as the IoT network layer and the case for it; optimising IP for IoT; profiles and compliance; application protocols, the transport layer and application transport methods.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- IPv6 and 6LoWPAN
- Optimising IP for IoT
- Application protocols: MQTT and CoAP
Unit 4: Data, Analytics and Security for IoT
8 hoursData analytics and machine learning for IoT; big-data tools; edge streaming and network analytics; IoT security history and challenges; OCTAVE and FAIR risk analysis; phased security in operational environments.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Data analytics and machine learning for IoT
- Edge streaming and network analytics
- IoT security and risk analysis: OCTAVE and FAIR
Unit 5: IoT Physical Devices and Endpoints
6 hoursBuilding IoT with Arduino; the Raspberry Pi board, its OS, configuration and Python programming; a wireless temperature-monitoring system; smart and connected cities, their architecture, security and use cases.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- IoT development boards: Arduino, Raspberry Pi, NodeMCU and ESP32
- Programming Raspberry Pi with Python
- IoT applications: smart cities and energy
Unit contents are summarised from the official DBATU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Technological University (DBATU).