DBATU · Third Year B.Tech Civil Engineering · NEP 2020
Water Quality Engineering
26AF1191PE603A · Elective II · Semester VI · 3 credits · Continuous assessment 20 + mid-semester 20 + end-semester 60
One of the Elective II options.
Unit 1: Fundamentals of Water Quality and Pollution
8 hoursWater quality terms; natural and man-made pollutants; zero-, first- and second-order pollution kinetics; reactions in water; WHO and IS 10500 standards for drinking, irrigation, industrial and aquatic use.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Water pollution: sources and kinetics
- Water quality and IS 10500
Unit 2: Water Quality Analysis and Instrumentation
8 hourspH, TDS, BOD, COD, DO, turbidity, alkalinity, hardness, nitrates and metals; titrimetric, gravimetric, spectrophotometric and electrometric analysis; pH, turbidity and DO meters, spectrophotometers and flame photometers.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Water quality parameters: BOD, COD and DO
- Instruments for water quality analysis
Unit 3: Water and Wastewater Treatment Technologies
8 hoursMechanical, biological and membrane filters; reverse osmosis and RO membranes; aeration, nitrogen removal, pH control and removal of solids and gases; disinfection by chlorine and other agents; ion exchange.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Aeration
- Membrane filtration
- Disinfection and chlorination
- Adsorption and ion exchange
Unit 4: Water and Wastewater Treatment Systems
6 hoursComponents and design principles of water treatment plants; primary, secondary and tertiary wastewater treatment; activated sludge, trickling filters, UASB reactors and membrane bioreactors; sludge management and disposal.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Sedimentation and settling tanks
- Rapid sand filters
- Activated sludge process
- Trickling filters
- UASB reactors and membrane bioreactors
- Sludge thickening and conditioning
Unit 5: Water Quality Index, Pollution Impacts and Modelling
6 hoursThe water quality index, its parameters and standards; pollution by pesticides and toxic metals (arsenic, lead, cadmium, mercury) and its control; water quality models QUAL2K and WASP: inputs, calibration and results.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Water quality index
- Toxic metals and pesticides in water
- Water quality modelling: QUAL2K and WASP
Unit contents are summarised from the official DBATU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Technological University (DBATU).