DBATU · Third Year B.Tech Civil Engineering · NEP 2020
Structural Mechanics-II
26AF1191PC501 · Semester V · 3 credits · Continuous assessment 20 + mid-semester 20 + end-semester 60
Unit 1: Analysis of Trusses, Moving Loads and Influence Lines
6 hoursDeterminate and indeterminate pin-jointed trusses by energy methods, with settlement and pre-strain; moving loads, equivalent UDL and absolute maximum bending moment and shear; influence lines for reactions, shear, moment and deflection of beams and for frame and truss members; the Müller-Breslau principle.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Redundant trusses by the unit load method
- Lack of fit, support settlement and temperature effects
- Influence lines for beams
- Influence lines for trusses
- Rolling loads and absolute maximum bending moment
- Müller-Breslau principle
Unit 2: Cables, Suspension Bridges and Arches
8 hoursForces in cables; suspension bridges with three- and two-hinged stiffening girders; Eddy's theorem; circular, parabolic and geometric arches, radial shear and normal thrust; three- and two-hinged arches with yielding supports, rib shortening and temperature; influence lines for three-hinged arches and suspension bridges.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Cables and suspension bridges
- Three-hinged arches
- Two-hinged arches
- Influence lines for arches and suspension bridges
Unit 3: Indeterminate Structures by the Flexibility Method
8 hoursFlexibility coefficients and compatibility equations applied to propped cantilevers, fixed and continuous beams, pin-jointed frames with lack of fit and rigid-jointed frames.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Flexibility and stiffness concepts
- Flexibility method for beams and frames
Unit 4: Indeterminate Structures by the Stiffness Method
9 hoursStiffness coefficients of prismatic members and equilibrium equations; indeterminate beams and rigid-jointed frames, including an inclined member with one sway freedom and support settlement; pin-jointed frames.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Stiffness method: structure and member approaches
- Beams by the stiffness method
- Portal frames by the stiffness method
Unit 5: Finite Element Method (Conceptual)
9 hoursDiscretisation and finite differences; 1D, 2D and 3D elements; plane stress and plane strain; isoparametric and axisymmetric elements; convergence and Pascal's triangle; direct stiffness method and minimum potential energy; shape functions and local and global stiffness matrices.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Finite element method: discretisation and element types
- Shape functions and stiffness matrices
- Plane stress and plane strain elements
Unit contents are summarised from the official DBATU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Technological University (DBATU).