DBATU · Third Year B.Tech Civil Engineering · NEP 2020
Hydraulic Structures
26AF1191PE602A · Elective I · Semester VI · 3 credits · Continuous assessment 20 + mid-semester 20 + end-semester 60
One of the Elective I options.
Unit 1: Fundamentals of Hydraulic Structures
8 hoursClassification of hydraulic structures; site selection and design parameters; factors in choosing a dam type; classifying dams by purpose, material, size, hydraulic and structural action; dams, earthquakes, social issues, rehabilitation and climate change; hydrological and geological considerations.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Classification of dams
- Selection of dam site and type
- Dams and society: rehabilitation and climate change
Unit 2: Dams and Reservoirs
8 hoursGravity, arch, earth-fill and rock-fill dams; stability, stresses and practical profiles of gravity dams; seepage and slope stability of earth dams; reservoir planning, sedimentation and its control; diversion headworks and weirs on permeable foundations.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Forces on gravity dams
- Stability and modes of failure
- Elementary profile of a gravity dam
- Phreatic line and seepage
- Reservoir sedimentation and trap efficiency
- Diversion headworks
Unit 3: Spillways and Energy Dissipators
8 hoursSpillways: function, components and types; energy dissipation; elementary design of an ogee spillway; outlets through concrete and earth dams and trash racks; classification, operation, maintenance and inspection of spillway crest gates.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Types of spillways
- Design of ogee spillway
- Energy dissipation and stilling basins
- Spillway gates
- Outlets in dams
Unit 4: Canal and River Structures
8 hoursWeirs and barrages on permeable foundations: causes of failure, creep theory and Khosla's theory; unlined canals by Kennedy's and Lacey's theories; lined canals and types of lining.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Bligh's and Lane's theories
- Khosla's theory
- Kennedy's theory
- Lacey's regime theory
- Canal lining
Unit 5: Dam Safety and Instrumentation
8 hoursObjectives of dam safety and instrumentation; piezometers, settlement cells, inclinometers, joint meters, pendulums, pressure cells, extensometers, strain gauges, temperature sensors and seismographs.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Dam instrumentation
- Dam safety programmes
Unit contents are summarised from the official DBATU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Technological University (DBATU).