DBATU · Third Year B.Tech Civil Engineering · NEP 2020
Highway and Railway Engineering
26AF1191PE604A · Elective III · Semester VI · 3 credits · Continuous assessment 20 + mid-semester 20 + end-semester 60
One of the Elective III options.
Unit 1: Highway Engineering
8 hoursClassification of highways; institutions for highway planning, design and construction; factors in highway alignment; urban and rural road cross-sections; conventional and modern surveys for alignment.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Classification of roads and road patterns
- Highway alignment
- Highway cross-section elements
Unit 2: Design of Highway Elements
8 hoursCross-sectional elements; horizontal curves, superelevation, transition curves and widening; sight distances; vertical curves and gradients; pavement components; IRC design of flexible and rigid pavements.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Sight distance
- Design of horizontal alignment
- Design of vertical alignment
- Flexible and rigid pavements
- Flexible pavement design to IRC 37
Unit 3: Highway Construction and Maintenance
8 hoursHighway materials, their properties and tests; construction of flexible and concrete pavements; highway drainage; evaluating and maintaining pavements.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Subgrade soil and CBR test
- Tests on road aggregates
- Bituminous binders and modified bitumen
- Construction of flexible and rigid pavements
- Highway drainage
- Pavement evaluation and maintenance
Unit 4: Railway Planning and Construction
8 hoursPermanent way: rails, sleepers, ballast, fixtures and fastenings; gauges; track stresses, coning of wheels, creep and rail defects; alignment surveys; geometric design: gradients, superelevation and gauge widening on curves; railway drainage, level crossings and signalling.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Permanent way and its components
- Railway gauges
- Coning of wheels and creep of rails
- Geometric design of railway track
Unit 5: Railway Track Construction, Maintenance and Operation
8 hoursPoints and crossings and turnout design; track circuiting; construction and maintenance of track; station and yard layouts; rolling stock, tractive power and track resistance; railways for urban transport: LRT and MRTS planning.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Points, crossings and turnouts
- Station yards and track maintenance
- Urban rail: LRT and MRTS
Unit contents are summarised from the official DBATU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Technological University (DBATU).