DBATU TY Civil syllabus

DBATU · Third Year B.Tech Civil Engineering · NEP 2020

Geotechnical Engineering

26AF1191PC504 · Semester V · 3 credits · Continuous assessment 20 + mid-semester 20 + end-semester 60

  1. Unit 1: Introduction

    10 hours

    History of soil mechanics; formation of soil; soil as a three-phase system and weight–volume relationships; index properties of coarse and fine-grained soils; BIS classification.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Soil formation, structure and clay minerals
    • Three-phase system and weight–volume relationships
    • Index properties of soil
    • Soil classification systems
  2. Unit 2: Compaction of Soil

    7 hours

    Mechanics of and factors in compaction; standard and modified Proctor tests; zero air voids line; dry and wet of optimum; field compaction and its control; CBR test, soaked and unsoaked.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Compaction and Proctor tests
    • Field compaction and its control
    • CBR test
  3. Unit 3: Permeability of Soil

    7 hours

    Darcy's law and its validity; discharge and seepage velocity; factors affecting permeability; laboratory and field determination; stratified deposits; drainage and dewatering methods.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Darcy's law and permeability
    • Permeability tests in the laboratory and field
    • Permeability of stratified soils
    • Drainage and dewatering of soil
  4. Unit 4: Shear Strength and Seepage Analysis

    10 hours

    Mohr's stress diagram and the Mohr–Coulomb failure envelope; unconfined compression, direct shear and triaxial tests under drainage conditions; the Laplace equation; seepage discharge and pressure; quicksand; flow nets; seepage through earth embankments; Terzaghi's filter criteria and piping.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Mohr–Coulomb failure theory
    • Direct shear test
    • Triaxial test and drainage conditions
    • Unconfined compression and vane shear tests
    • Laplace equation for 2-D flow
    • Seepage pressure and quicksand
    • Flow nets and seepage discharge
    • Filter design and piping
  5. Unit 5: Stresses in Soils and Consolidation

    7 hours

    Stress distribution in a soil mass; Boussinesq's theory for point and uniformly loaded areas; Newmark's influence chart; consolidation, the spring analogy, Terzaghi's one-dimensional theory and the consolidometer test.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Boussinesq's theory
    • Newmark's influence chart
    • Terzaghi's one-dimensional consolidation
    • Consolidation test

Unit contents are summarised from the official DBATU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Technological University (DBATU).