DBATU TY Civil syllabus

DBATU · Third Year B.Tech Civil Engineering · NEP 2020

Foundation Engineering

26AF1191PC605 · Semester VI · 3 credits · Continuous assessment 20 + mid-semester 20 + end-semester 60

  1. Unit 1: Introduction and Soil Exploration

    8 hours

    Requirements for satisfactory foundations; planning and methods of soil exploration; disturbed and undisturbed sampling; rock drilling, core barrels and core recovery; field tests for bearing capacity, procedures and limits.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Planning subsurface exploration
    • Boring, sampling and samplers
    • Rock drilling and core recovery
    • SPT and its corrections
    • Plate load test
  2. Unit 2: Bearing Capacity Analysis

    10 hours

    Failure modes; Terzaghi's analysis and Skempton's values; Meyerhof's analysis; IS code method; water table and eccentricity; safe bearing capacity and allowable pressure; immediate, consolidation, differential and tolerable settlement; angular distortion.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Terzaghi's bearing capacity theory
    • Meyerhof, Hansen, Vesic and IS methods
    • Layered soils, water table and eccentricity
    • Immediate settlement
    • Allowable and differential settlement
  3. Unit 3: Foundations for Difficult Soils, Shallow Foundations

    10 hours

    Weak, compressible, expansive, collapsible and corrosive soils; swelling and its prevention; foundations on swelling soils; ground improvement; rigid design of isolated, combined and strap footings; raft foundations by elastic analysis and the IS code.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Swelling of black cotton soils
    • Foundations on expansive soils
    • Proportioning of combined and strap footings
    • Raft foundations
  4. Unit 4: Deep Foundations

    8 hours

    Classification and driving of piles; static and dynamic capacity formulae and load tests; negative skin friction; under-reamed piles; pile groups; box, pneumatic and open caissons, grip length and well sinking; cantilever and anchored sheet piles; cellular cofferdams.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Classification and installation of piles
    • Static capacity of piles
    • Dynamic pile formulae
    • Pile load tests
    • Pile groups and negative skin friction
    • Under-reamed piles
    • Piers and caissons
    • Cantilever and anchored sheet piles
    • Cofferdams
  5. Unit 5: Slope Stability

    8 hours

    Definitions of factor of safety; types of slope failure; infinite slopes in cohesionless and cohesive soils; finite slopes by the slip-circle method.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Factors of safety and types of slope failure
    • Stability of infinite slopes
    • Stability of finite slopes: slip circle method

Unit contents are summarised from the official DBATU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Technological University (DBATU).