DBATU TY Civil syllabus

DBATU · Third Year B.Tech Civil Engineering · NEP 2020

Design of Concrete Structures

26AF1191PC601 · Semester VI · 3 credits · Continuous assessment 20 + mid-semester 20 + end-semester 60

  1. Unit 1: Fundamentals and the Working Stress Method

    6 hours

    Structural design and the WSM, ULM and LSM philosophies compared; stress–strain behaviour of concrete and steel; factor of safety and loads; permissible stresses and the basic design of RC sections by WSM.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Working stress and limit state methods
    • Design of RC sections by the working stress method
  2. Unit 2: Structural Design Using WSM

    10 hours

    Balanced, under- and over-reinforced sections; singly and doubly reinforced beams; shear design and detailing; short columns under axial and uniaxial eccentric loads; isolated footings; IS 456 Annex B.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Singly and doubly reinforced beams by WSM
    • Columns and footings by WSM
  3. Unit 3: Limit State Method: Philosophy, Shear and Bond

    8 hours

    Limit states; characteristic loads and strengths and partial safety factors; strain and stress diagrams; serviceability; design for shear and minimum shear steel; bond, development length and anchorage.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Characteristic loads, strengths and partial safety factors
    • Design for shear
    • Bond, development length and torsion
  4. Unit 4: Limit State Design in Flexure: Beams, Slabs and Staircases

    8 hours

    Singly and doubly reinforced and flanged beams; one-way and two-way slabs and their detailing; deflection and crack control; dog-legged and open-well staircases.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Singly reinforced rectangular sections
    • Doubly reinforced sections
    • Flanged sections
    • One-way slabs
    • Two-way slabs
    • Dog-legged staircase
    • Open-well staircase
  5. Unit 5: Compression Members and Footings: Limit State Design

    8 hours

    Axially and eccentrically loaded short columns, rectangular and circular; interaction diagrams for uniaxial bending and the concept of biaxial bending; isolated footings for axial and uniaxial loads; reinforcement layout and anchorage.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Short columns under axial load
    • Columns with uniaxial and biaxial bending
    • Isolated footings

Unit contents are summarised from the official DBATU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Technological University (DBATU).