DBATU · Second Year B.Tech Mechanical Engineering · NEP 2020
Strength of Materials
25AF1612PC403 · Semester IV · 3 credits · Continuous assessment 20 + mid-semester 20 + end-semester 60
Unit 1: Simple Stresses and Strains
Stress, strain and Hooke's law; thermal and hoop stresses; Poisson's ratio, bulk and shear moduli and their relations; principal stresses and planes in 2-D, principal strains and strain rosettes.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Types of loads, stress and strain
- Hooke's law and elastic constants
- Relations between elastic constants
- Thermal stresses in plain and composite bars
- Principal stresses and planes
- Mohr's circle for plane stress
Unit 2: Strain Energy, Resilience and Combined Stresses
Strain energy and proof resilience under gradual, sudden and impact loads; combined axial and bending loads, the middle-third rule and the kernel; short and long columns, Euler's and Rankine's formulae and eccentric loading.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Strain energy under gradual, sudden and impact loads
- Combined normal and shear stresses
- Euler's theory of columns and end conditions
- Limitations of Euler's theory
- Rankine's formula
Unit 3: Stresses in Beams
Moments of inertia; the theory of simple bending and the flexure formula; economic sections; shear stress distribution in rectangular, circular and I sections; torsion of solid and composite shafts and torsional strain energy.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Moment of inertia of common sections
- Theory of simple bending and the flexure formula
- Bending stress distribution and section modulus
- Shear stress distribution in beams
- Torsion of circular shafts
- Stepped and composite shafts
- Torsional resilience
Unit 4: Shear Force and Bending Moment Diagram
Beams, supports and loads; shear force and bending moment under point loads, UDL, UVL and couples; relations between load, SF and BM; SFD and BMD for cantilever, simple and compound beams; points of contraflexure.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Beams, supports and types of loading
- SFD and BMD for point loads and UDL
- SFD and BMD for UVL, couples and combined loads
- Relation between load, shear force and bending moment
- Maximum bending moment and point of contraflexure
Unit 5: Deflection of Beams
The differential equation of the deflected beam; double integration and Macaulay's methods; the area-moment method; deflection of cantilevers and simply supported beams; the conjugate-beam method and superposition.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Double integration method
- Macaulay's method
- Area-moment method
- Conjugate beam method
Unit contents are summarised from the official DBATU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Technological University (DBATU).