DBATU SY IT syllabus

DBATU · Second Year B.Tech Information Technology · NEP 2020

Computer Organization and Architecture

25AF1246PC403 · Semester IV · 3 credits · Continuous assessment 20 + mid-semester 20 + end-semester 60

All notes for this subject
  1. Unit 1: Introduction

    7 hours

    Computer organisation versus architecture; the functional units; computer function and interconnection; CPU structure and function.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Computer organisation and architecture
    • Functional units of a computer
    • Computer function and interconnection
    • CPU structure and function
  2. Unit 2: Instruction Sets and Computer Arithmetic

    8 hours

    Operand and operation types; assembly language; addressing modes; instruction formats and types; instruction execution; RISC and CISC; the ALU; integer representation and arithmetic; floating-point representation and arithmetic.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Instruction set characteristics and operand types
    • Addressing modes
    • Instruction formats and execution
    • RISC and CISC architectures
    • Integer representation and arithmetic
    • Floating-point representation and arithmetic
  3. Unit 3: Memory Organization

    7 hours

    Semiconductor main memory; error detection and correction; advanced DRAM organisation; virtual and cache memory; magnetic disk, tape and optical memory; RAID.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Semiconductor main memory and DRAM organisation
    • Error detection and correction in memory
    • Cache memory
    • Virtual memory
    • External memory and RAID
  4. Unit 4: Control Unit

    7 hours

    Micro-operations; control of the processor; hardwired and microprogrammed control units.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Micro-operations
    • Hardwired control unit
    • Microprogrammed control unit
  5. Unit 5: Input/Output Organization and Parallel Processing

    8 hours

    External devices and I/O modules; programmed, interrupt-driven I/O and DMA; instruction pipelining; multiprocessor organisation, symmetric multiprocessors, cache coherence and the MESI protocol.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • I/O modules and programmed I/O
    • Interrupt-driven I/O and DMA
    • Instruction pipelining
    • Symmetric multiprocessors
    • Cache coherence and the MESI protocol

Unit contents are summarised from the official DBATU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Technological University (DBATU).