DBATU · Second Year B.Tech Electronics & Telecommunication Engineering · NEP 2020
Signals and Systems
25AF1372PC401 · Semester IV · 3 credits · Continuous assessment 20 + mid-semester 20 + end-semester 60
Unit 1: Introduction to Signals and Systems
Continuous and discrete-time signals and their classification; elementary test signals; amplitude and time operations; the sampling theorem, reconstruction and aliasing; classification of systems.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Continuous-time and discrete-time signals
- Classification of signals
- Elementary signals and their relationships
- Operations on signals
- Sampling theorem, reconstruction and aliasing
- Classification of systems
Unit 2: Time-domain Representation of LTI Systems
Input–output relation and impulse response; convolution sum and integral, graphical convolution; properties of convolution; system properties from the impulse response; step response.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- LTI systems and impulse response
- Convolution sum
- Convolution integral by the graphical method
- Properties of convolution
- System properties from the impulse response and step response
Unit 3: Fourier Series
Fourier series of periodic CT signals, Dirichlet conditions, exponential series and spectra; properties; the Gibbs phenomenon; discrete-time Fourier series.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Trigonometric and exponential Fourier series
- Dirichlet conditions and the Gibbs phenomenon
- Properties of the Fourier series
- Discrete-time Fourier series
Unit 4: Fourier Transform
Fourier transform of aperiodic CT signals and its existence; magnitude and phase; transforms of standard and periodic signals; the DTFT; CTFT and DTFT properties; sampling and reconstruction in the frequency domain; band-pass sampling.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Fourier transform and its existence
- Fourier transforms of standard signals
- Properties of the Fourier transform
- Fourier transform of periodic signals
- Discrete-time Fourier transform
- Sampling in the frequency domain and band-pass sampling
Unit 5: Laplace and Z-Transform
Need for the Laplace transform; ROC and properties; inverse by partial fractions; LTI analysis; the Z-transform, its properties and inverse methods; Z-domain analysis of DT LTI systems.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Laplace transform and region of convergence
- Properties of the Laplace transform
- Inverse Laplace transform by partial fractions
- Stability in the s-domain
- Z-transform and its properties
- Inverse Z-transform methods
- LTI system analysis with the Z-transform
Unit contents are summarised from the official DBATU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Technological University (DBATU).