DBATU SY E&TC syllabus

DBATU · Second Year B.Tech Electronics & Telecommunication Engineering · NEP 2020

Network Theory

25AF1372PC412 · Semester IV · 3 credits · Continuous assessment 20 + mid-semester 20 + end-semester 60

  1. Unit 1: Network Theorems

    Nodal and mesh analysis; linearity, superposition and source transformation; Thevenin's, Norton's and maximum power transfer theorems; network topology; SPICE in circuit analysis.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Mesh and nodal analysis with dependent sources
    • Superposition and source transformation
    • Thevenin's and Norton's theorems
    • Maximum power transfer theorem
    • Network topology
    • Circuit simulation with SPICE
  2. Unit 2: Transient Analysis and Frequency-domain Analysis

    Source-free RL and RC circuits; unit-step forcing; source-free and complete response of series and parallel RLC circuits; lossless LC circuits; phasors, sinusoidal steady state and AC power.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Transient response of RL and RC circuits
    • Step response of RLC circuits and damping
    • Phasors and sinusoidal steady-state analysis
    • AC power analysis
  3. Unit 3: Laplace Transform and Its Circuit Applications

    The Laplace transform; initial and final value theorems; circuit analysis in the s-domain; frequency response.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Initial and final value theorems
    • Circuit analysis in the s-domain
    • Network functions: driving point and transfer
    • Poles and zeros of network functions
  4. Unit 4: Two-port Networks

    Z, Y, h and ABCD parameters; interconnected and magnetically coupled two-ports; three-terminal networks.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Two-port parameters: Z, Y, ABCD and h
    • Reciprocity and symmetry in two-port networks
    • Interconnection of two-port networks
  5. Unit 5: State Variable Analysis and RL and RC Network Synthesis

    State variables, normal-form equations and their matrix solution; synthesis of one-port RL and RC networks; transfer-function synthesis; basics of filter design.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • State-variable analysis of networks
    • Synthesis of one-port RL and RC networks
    • Transfer function synthesis and basic filter design

Unit contents are summarised from the official DBATU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Technological University (DBATU).