DBATU SY E&TC syllabus

DBATU · Second Year B.Tech Electronics & Telecommunication Engineering · NEP 2020

Microprocessors

25AF1372PC403 · Semester IV · 3 credits · Continuous assessment 20 + mid-semester 20 + end-semester 60

  1. Unit 1: Fundamentals of Microprocessor

    Basic 8085 architecture and its functional blocks; 8085 pin-outs and signals.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Microprocessor-based system and evolution
    • 8085 architecture and functional blocks
    • 8085 registers and flags
    • 8085 pin diagram and signals
    • Demultiplexing the address/data bus
  2. Unit 2: Programming with 8085

    Assembly language basics; addressing modes; the instruction set; timing diagrams; writing, assembling and executing programs.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • 8085 addressing modes
    • 8085 data transfer and arithmetic instructions
    • 8085 logical, branch and machine-control instructions
    • Instruction cycle, machine cycles and timing diagrams
    • 8085 assembly language programming
    • Stack and subroutines in the 8085
  3. Unit 3: Interrupts

    The 8085 interrupt structure; vectored and non-vectored interrupts; latency and response time; handling multiple interrupts.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • 8085 interrupt structure
    • Vectored and non-vectored interrupts
    • RST instructions, SIM and RIM
    • Interrupt latency and handling multiple interrupts
  4. Unit 4: Memory and Peripheral Interfacing

    Memory interfacing; the 8255 PPI, 8254 programmable interval timer, 8279 display controller and 8259 interrupt controller.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Memory interfacing and address decoding
    • 8255 programmable peripheral interface
    • 8254 programmable interval timer
    • 8279 keyboard and display controller
    • 8259 programmable interrupt controller
  5. Unit 5: Introduction to the 8086 Microprocessor

    8086 architecture in detail; addressing modes; assembler directives; the coprocessor.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • 8086 architecture and memory segmentation
    • 8086 addressing modes
    • 8086 assembler directives
    • 8087 math coprocessor

Unit contents are summarised from the official DBATU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Technological University (DBATU).