DBATU SY Electrical syllabus

DBATU · Second Year B.Tech Electrical Engineering · NEP 2020

Network Theory

25AF1293PC303 · Semester III · 3 credits · Continuous assessment 20 + mid-semester 20 + end-semester 60

  1. Unit 1: Network Topology

    6 hours

    Graph theory: incidence, fundamental loop and cut-set matrices; mesh and nodal analysis; star–delta and source transformation; duality.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Graph theory: incidence, loop and cut-set matrices
    • Mesh analysis and supermesh
    • Nodal analysis and supernode
    • Star-delta transformation
    • Source transformation
    • Duality
  2. Unit 2: Network Theorems

    6 hours

    Superposition, Thevenin's, Norton's, maximum power transfer and Tellegen's theorems for AC and DC; time- and frequency-domain analysis for step, ramp, exponential and damped exponential inputs.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Superposition theorem
    • Thevenin's and Norton's theorems
    • Maximum power transfer theorem
    • Tellegen's theorem
    • Response to step, ramp and exponential inputs
  3. Unit 3: Transient Analysis

    6 hours

    First- and second-order differential equations reviewed; classical transient analysis of DC circuits for a unit step; circuit elements under switching; initial conditions; simulation studies.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Initial and final conditions
    • Time constants of RL and RC circuits
    • Transient response of RL and RC circuits
    • Transient response of RLC circuits
  4. Unit 4: Three-phase Systems and Resonance

    6 hours

    Balanced and unbalanced three-phase systems and their real and reactive power; series and parallel RLC resonance, resonant frequency, bandwidth and quality factor.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Balanced and unbalanced three-phase systems
    • Real and reactive power in three-phase circuits
    • Series resonance
    • Parallel resonance, bandwidth and Q factor
  5. Unit 5: Two-port Networks

    6 hours

    Terminal pairs; driving-point and transfer admittances; transfer functions, poles and zeros; Z, Y and transmission parameters and the relationships between parameter sets.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Network functions of one-port and two-port networks
    • Poles and zeros of network functions
    • Z, Y and transmission parameters
    • Relationships between two-port parameters

Unit contents are summarised from the official DBATU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Technological University (DBATU).