DBATU SY Electrical syllabus

DBATU · Second Year B.Tech Electrical Engineering · NEP 2020

Electrical Machine I

25AF1293PC402 · Semester IV · 3 credits · Continuous assessment 20 + mid-semester 20 + end-semester 60

  1. Unit 1: Single-phase Transformers

    7 hours

    EMF equation; equivalent circuit referred to either side; phasor diagrams on load; regulation, losses, efficiency and maximum efficiency; autotransformers; variable-frequency, welding and pulse transformers.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Equivalent circuit of a transformer
    • Phasor diagrams of a transformer
    • Voltage regulation of a transformer
    • Efficiency and all-day efficiency
    • Autotransformers
    • Special transformers: welding, pulse and variable frequency
  2. Unit 2: Three-phase Transformers

    7 hours

    Construction and working; connections and factors in choosing them; phasor diagrams and vector groups; open-delta (V–V) connection; performance.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Three-phase transformer connections
    • Vector groups
    • Scott and V-V connections
  3. Unit 3: Applications, Standards and Troubleshooting of Transformers

    7 hours

    Applications; Scott connection; troubleshooting and relevant Indian Standards; cooling; parallel operation; testing; three-winding transformers; on-load tap changing.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Parallel operation and load sharing
    • Open-circuit and short-circuit tests on transformers
    • Sumpner's test
    • Three-winding transformers
    • Transformer cooling
    • On-load tap changers
    • Transformer troubleshooting and Indian Standards
  4. Unit 4: DC Machines

    6 hours

    Construction and working; back EMF and generated EMF; methods of excitation and types; armature reaction, commutation, magnetising and demagnetising ampere-turns; torque and speed equations.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Construction and EMF equation of DC generators
    • Types of DC machines by excitation
    • Back EMF and torque equation of DC motors
    • Armature reaction and commutation
  5. Unit 5: Characteristics and Testing of DC Machines

    6 hours

    Open-circuit characteristic of a DC generator; brake, Swinburne's and Hopkinson's tests; losses, efficiency and maximum efficiency; starters; speed control and braking of DC motors.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Open-circuit characteristic of a DC generator
    • Characteristics of DC shunt and series motors
    • Brake test on a DC motor
    • Swinburne's and Hopkinson's tests
    • Losses and efficiency of DC machines
    • DC motor starters
    • Speed control of DC motors
    • Braking of DC motors

Unit contents are summarised from the official DBATU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Technological University (DBATU).