DBATU SY Computer syllabus

DBATU · Second Year B.Tech Computer Engineering · NEP 2020

Digital Electronics

25AF1245PC307 · Semester III · 2 credits · Continuous assessment 20 + mid-semester 20 + end-semester 60

All notes for this subject
  1. Unit 1: Introduction

    5 hours

    Digital signals and circuits; AND, OR, NOT, NAND, NOR and XOR operations; Boolean algebra; IC gates.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

  2. Unit 2: Number Systems

    5 hours

    Binary, signed binary, octal and hexadecimal numbers; binary arithmetic; one's and two's complement arithmetic; codes; error-detecting and error-correcting codes.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

  3. Unit 3: Combinational Logic Design

    5 hours

    Standard representations of logic functions; K-maps in SOP and POS form; minimising functions of up to four variables with don't-care conditions.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

  4. Unit 4: Design Examples

    5 hours

    Arithmetic circuits; BCD-to-7-segment decoder and code converters; adders and subtractors, look-ahead carry and the ALU; comparators, parity generators and checkers; multiplexers, demultiplexers and decoders.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

  5. Unit 5: Sequential Circuits and Systems

    6 hours

    Latches and clocked SR, JK, T and D flip-flops; shift registers and serial–parallel conversion; ring counters and sequence generators; ripple and synchronous counters and their design.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

Unit contents are summarised from the official DBATU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Technological University (DBATU).