DBATU · Second Year B.Tech Computer Engineering · NEP 2020
Computer Architecture and Organization
25AF1245PC402 · Semester IV · 3 credits · Continuous assessment 20 + mid-semester 20 + end-semester 60
Unit 1: Introduction
7 hoursComputer organisation versus architecture; functional units; computer function and interconnection; CPU structure and function.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Computer history and the von Neumann architecture
- Computer components and bus interconnection
- CPU structure and function
Unit 2: Instruction Sets
7 hoursOperand and operation types; assembly language; addressing modes; instruction formats, types and execution; processor status; RISC and CISC.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Instruction formats and the instruction cycle
- Addressing modes and types of operands
- RISC, CISC and pipelining
Unit 3: Computer Arithmetic
8 hoursThe ALU; integer representation and arithmetic; floating-point representation and arithmetic; arithmetic co-processors.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Sign-magnitude, 1's and 2's complement
- Addition and subtraction of signed numbers
- Multiplication and Booth's algorithm
- Restoring and non-restoring division
- IEEE 754 floating-point representation
- Floating-point arithmetic
Unit 4: Memory Organization
8 hoursSemiconductor main memory, error correction and advanced DRAM; virtual and cache memory; magnetic disk and tape, optical memory, RAID and memory controllers.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Semiconductor main memory and DRAM
- The memory hierarchy
- Cache memory and mapping functions
- Virtual memory: paging and segmentation
- Hard disks and RAID
- Optical memory and magnetic tape
Unit 5: Control Unit and Input/Output Organization
8 hoursMicro-operations; hardwired and micro-programmed control, microinstruction sequencing and execution; I/O modules, programmed and interrupt-driven I/O, DMA and I/O channels; pipelining, symmetric multiprocessors, cache coherence and MESI.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Hardwired and microprogrammed control units
- Micro-operations and microinstruction sequencing
- I/O modules and channels
- Programmed I/O, interrupt-driven I/O and DMA
- SMP, UMA and NUMA
- Cache coherence
Unit contents are summarised from the official DBATU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Technological University (DBATU).