DBATU · Second Year B.Tech Civil Engineering · NEP 2020
Structural Mechanics-I
25AF1191PC401 · Semester IV · 3 credits · Continuous assessment 20 + mid-semester 20 + end-semester 60
Unit 1: Beam Deflections
6 hoursDeflection of determinate beams by double integration, Macaulay's method, the moment-area and conjugate-beam methods, and superposition.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Slope and deflection by Macaulay's and moment-area methods
- Conjugate beam method
- Deflection by superposition
Unit 2: Energy Principles
6 hoursStrain energy in axial load, shear, flexure and torsion; Castigliano's and Engesser's theorems; the principle of virtual work; deflection of beams by energy theorems; Maxwell's reciprocal theorem; Williot–Mohr diagrams.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Strain energy and Castigliano's theorems
- Principle of virtual work
- Betti's and Maxwell's reciprocal theorems
- Williot–Mohr diagrams
Unit 3: Method of Consistent Deformation
8 hoursStructural systems, indeterminacy and the choice of unknowns; propped cantilevers and fixed beams: fixed-end moments and reactions for standard loads, slopes and deflections.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Static and kinematic indeterminacy
- Propped cantilever by consistent deformation
- Fixed beams
Unit 4: Moment Distribution Method
8 hoursContinuous beams and propped cantilevers; the theorem of three moments; settlement and thermal effects; SFD and BMD of continuous beams; portal frames with and without sway.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Stiffness, carry-over and distribution factors
- Beams by moment distribution
- Theorem of three moments
- Non-sway frames by moment distribution
- Sway frames by moment distribution
Unit 5: Slope Deflection Method
8 hoursContinuous beams and rigid frames without and with sway; settlement effects; an introduction to frames with sloping legs and gabled frames.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Slope-deflection equations
- Beams by slope deflection
- Non-sway frames by slope deflection
- Sway frames by slope deflection
Unit contents are summarised from the official DBATU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Technological University (DBATU).