DBATU · Second Year B.Tech Civil Engineering · NEP 2020
Mechanics of Solids
25AF1191PC302 · Semester III · 3 credits · Continuous assessment 20 + mid-semester 20 + end-semester 60
Unit 1: Stresses and Strains
8 hoursNormal, shear and bearing stress; statically indeterminate members; stress–strain diagrams; Hooke's law, Poisson's ratio, biaxial and triaxial stress; elastic constants; strain measurement and sensors; strain energy under gradual, sudden and impact loads; thermal stresses.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Stress, strain and stress–strain diagrams
- Elastic constants and their relations
- Statically indeterminate bars
- Strain energy under gradual, sudden and impact loads
- Temperature stresses
Unit 2: Axial Force, Shear Force and Bending Moment
8 hoursUnbalanced forces and moments at a section; axial force, shear force and bending moment diagrams; relations among load, shear and moment; an introduction to moving loads.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Shear force and bending moment: concepts and relations
- SFD and BMD for point loads and UDL
- SFD and BMD for UVL and couples
- Points of contraflexure
Unit 3: Stresses in Beams, Direct and Bending Stresses
8 hoursSimple bending and the flexure formula; economic sections, moment of resistance and section modulus; shear stress distribution, shear flow, shear lag and shear centre; combined axial load and bending, uniaxial and biaxial eccentric loads, the kern of a section.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Theory of simple bending and the flexure formula
- Bending stress distribution and moment of resistance
- Shear stress distribution across sections
- Shear flow and shear centre
- Direct and bending stresses: eccentric loading
- Core of a section
Unit 4: Combined Stresses and Strains, Theories of Failure
8 hoursCombined stress at a point, analytically and graphically; absolute maximum shear stress; principal stresses and strains; Mohr's circle; maximum principal stress, principal strain, strain energy, shear stress and shear strain theories of failure.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Stresses on an oblique plane
- Principal stresses and maximum shear stress
- Mohr's circle
- Theories of failure
Unit 5: Columns and Struts, Torsion of Shafts, Thin-walled Structures
8 hoursShort and long columns; Euler's crippling load for different end conditions and its limits; equivalent length; Rankine's formula; torsion of solid and hollow circular shafts and power transmission; stresses in thin cylinders and spheres.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Euler's theory of columns and effective length
- Rankine's formula
- Torsion of circular shafts
- Power transmitted by shafts
- Thin cylinders and spheres
Unit contents are summarised from the official DBATU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Technological University (DBATU).