DBATU SY Civil syllabus

DBATU · Second Year B.Tech Civil Engineering · NEP 2020

Hydraulics Engineering

25AF1191PC403 · Semester IV · 3 credits · Continuous assessment 20 + mid-semester 20 + end-semester 60

  1. Unit 1: Fluid Statics

    6 hours

    Fluid properties and the continuum; Pascal's law and pressure measurement; hydrostatic forces on plane and curved surfaces; buoyancy, stability of submerged and floating bodies and metacentric height.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Properties of fluids
    • Pressure and its measurement
    • Total pressure and centre of pressure
    • Pressure on curved surfaces
    • Buoyancy and metacentric height
  2. Unit 2: Kinematics and Dynamics of Fluid Flow

    8 hours

    Types of flow; continuity in one, two and three dimensions; velocity and acceleration; velocity potential and stream function; flow nets; Euler's and Bernoulli's equations; venturimeter, orifice meter and Pitot tube; the momentum equation; free and forced vortices; Navier–Stokes.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Types of flow and flow lines
    • Continuity equation
    • Velocity potential and stream function
    • Flow nets
    • Euler's equation and Bernoulli's equation
    • Venturimeter and orifice meter
    • Momentum equation and its applications
    • Free and forced vortex flow
  3. Unit 3: Laminar and Turbulent Flow

    8 hours

    Laminar flow between plates and through tubes; shear stress and velocity distribution in turbulent pipe flow; Prandtl's mixing length; Nikuradse's experiments; boundary layer thickness and separation; lift and drag.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Laminar flow: Hagen–Poiseuille equation
    • Prandtl's mixing length and velocity distribution
    • Boundary layer theory and separation
    • Drag and lift
  4. Unit 4: Dimensional Analysis

    5 hours

    Dimensions of physical quantities; Rayleigh's and Buckingham π methods; similitude and model scales; dimensionless numbers; distorted and undistorted models.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Dimensional analysis: Rayleigh and Buckingham π methods
    • Model similitude and dimensionless numbers
  5. Unit 5: Flow through Pipes

    9 hours

    Minor losses and friction loss by Darcy–Weisbach; HGL and TEL; pipes in series and parallel and between reservoirs; Hardy Cross networks; siphons and power transmission; water hammer and surge tanks; the Moody chart.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Turbulent flow and Darcy–Weisbach equation
    • Minor losses in pipes
    • Hydraulic gradient and energy lines
    • Pipes in series and parallel
    • Pipe networks: Hardy Cross method
    • Siphons, water hammer and power through nozzles
    • Surge tanks and the Moody chart

Unit contents are summarised from the official DBATU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Technological University (DBATU).