DBATU Final Year Mechanical syllabus

DBATU · Final Year B.Tech Mechanical Engineering · Non-NEP

Stress Analysis

BTMPE703G · Elective I · Semester VII · 3 credits · Continuous assessment 20 + mid-semester 20 + end-semester 60

One of the Elective I options.

  1. Unit 1: Two-dimensional Problems in Cartesian Coordinates

    7 hours

    Stress and strain components and elastic constants; plane stress and plane strain; differential equations of equilibrium; Saint-Venant's principle; compatibility equations; Airy's stress function.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Stress and strain components and elastic constants
    • Plane stress and plane strain
    • Differential equations of equilibrium
    • Saint-Venant's principle
    • Compatibility equations
    • Airy's stress function
  2. Unit 2: Two-dimensional Problems in Polar Coordinates

    7 hours

    Equilibrium and compatibility equations in polar coordinates; relating polar and Cartesian stress components; stress distribution symmetric about an axis.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Equilibrium equations in polar coordinates
    • Compatibility in polar coordinates
    • Transforming stresses between polar and Cartesian coordinates
    • Axisymmetric stress distribution
  3. Unit 3: Applications of the Theory of Elasticity

    7 hours

    Elasticity solutions for a cantilever with an end load and a simply supported beam under UDL; cylinders under internal and external pressure; pure bending of curved beams.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Elasticity solution of a cantilever with an end load
    • Simply supported beam under UDL by elasticity
    • Thick cylinders under internal and external pressure
    • Pure bending of curved beams
  4. Unit 4: Photoelasticity

    7 hours

    Optics for photoelasticity, the stress-optic law, plane and circular polariscopes, isoclinics and isochromatics; calibrating the fringe constant; photoelastic materials and models; Tardy's compensation and separation techniques; 3-D photoelasticity, stress freezing and reflection polariscopes.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Stress-optic law and polariscopes
    • Isoclinics and isochromatics
    • Fringe constant calibration and photoelastic materials
    • Tardy's compensation and separation techniques
    • 3D photoelasticity and stress freezing
  5. Unit 5: Strain Gauges

    7 hours

    Electrical resistance strain gauges and gauge factor; the Wheatstone bridge, its balance, output and configurations; principal strains and stresses from strain rosettes; strain on rotating components; grid and brittle-coating methods.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Electrical resistance strain gauges and gauge factor
    • Wheatstone bridge configurations for strain gauges
    • Strain rosettes and principal strains
    • Strain measurement on rotating components
    • Grid and brittle coating methods

Unit contents are summarised from the official DBATU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Technological University (DBATU).