DBATU Final Year Mechanical syllabus

DBATU · Final Year B.Tech Mechanical Engineering · Non-NEP

Non-conventional Machining

BTMPE703C · Elective I · Semester VII · 3 credits · Continuous assessment 20 + mid-semester 20 + end-semester 60

One of the Elective I options.

  1. Unit 1: Introduction to Non-Conventional Machining Processes

    7 hours

    An overview, trends in manufacturing, and the classification of non-conventional machining processes.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Classification of modern machining processes
  2. Unit 2: Chemical and Electrochemical Processes

    7 hours

    Chemical machining, ECM, electrochemical grinding, deburring and honing: mechanism of material removal, process characteristics and parameters, equipment, tooling (maskants and etchants), advantages, applications and limits.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Chemical and photochemical machining
    • Electrochemical machining
    • Electrochemical grinding
    • Electrochemical deburring and honing
  3. Unit 3: Thermo-Electrical Processes

    7 hours

    EDM, electron beam, ion beam and plasma arc machining and hot machining: mechanism, characteristics, parameters, equipment, applications and limits.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Electric discharge machining
    • Electron beam machining
    • Focused ion beam machining
    • Plasma arc machining
    • Hot machining
  4. Unit 4: Mechanical Processes

    7 hours

    Ultrasonic machining, abrasive jet and abrasive flow machining and water-jet cutting: mechanism, characteristics, parameters, equipment, applications and limits.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Ultrasonic machining
    • Abrasive jet machining
    • Abrasive water jet machining
    • Magnetic abrasive and abrasive flow finishing
  5. Unit 5: Laser-Based and Hybrid Processes

    7 hours

    Types of lasers, beam generation and laser beam machining; hybrid processes: shaped-tube electrolytic machining, wire EDM, ELID grinding; micro EDM, micro ECM and electro-discharge chemical grinding.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Laser beam machining
    • Hybrid machining processes and their classification
    • Shaped tube electrolytic machining and ELID grinding
    • Wire EDM
    • Micro EDM
    • Micro ECM and electro-discharge chemical grinding

Unit contents are summarised from the official DBATU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Technological University (DBATU).