DBATU Final Year Mechanical syllabus

DBATU · Final Year B.Tech Mechanical Engineering · Non-NEP

Design of Air-Conditioning Systems

BTMPE703A · Elective I · Semester VII · 3 credits · Continuous assessment 20 + mid-semester 20 + end-semester 60

One of the Elective I options.

  1. Unit 1: Introduction

    7 hours

    Moist-air properties; psychrometry of air-conditioning processes; sensible heat factor and dehumidified air quantity; HVAC equipment.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Psychrometric processes
    • Bypass factor, ADP and sensible heat factors
  2. Unit 2: Human Comfort

    7 hours

    Human and environmental comfort indices, clothing resistance and metabolism; indoor air quality and ventilation air; inside and outside design conditions.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Thermal comfort
    • Indoor air quality
    • Inside and outside design conditions
  3. Unit 3: Heat Flow

    7 hours

    Heat flow and heat transfer in buildings; cooling load calculation; ventilation load; effective sensible heat factor and selecting the air-conditioning apparatus.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Cooling load estimation
    • Sol-air temperature and CLTD
    • Ventilation and infiltration
  4. Unit 4: Air Diffusion

    7 hours

    Room air diffusion and filtration; duct design and pressure drop; air distribution design and outlets.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Room air diffusion and filtration
    • Friction loss in ducts and equivalent diameter
    • Duct design methods
    • Air distribution devices
  5. Unit 5: Air-Conditioning Systems and Equipment

    7 hours

    Constant-volume, VAV, terminal reheat, single- and multi-zone and dual-duct systems; fan coil units and noise control; fans, pumps and blowers and their selection.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Single-zone, multi-zone, dual-duct and terminal reheat systems
    • VRF and VAV systems
    • Fan coil units and noise control
    • Fan laws and fans

Unit contents are summarised from the official DBATU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Technological University (DBATU).