DBATU Final Year E&TC syllabus

DBATU · Final Year B.Tech Electronics & Telecommunication Engineering · Non-NEP

Microwave Engineering

BTETC701 · Semester VII · 4 credits · Continuous assessment 20 + mid-semester 20 + end-semester 60

  1. Unit 1: Transmission Lines and Waveguides

    10 hours

    RF and microwave transmission lines, standing waves, coaxial lines and line parameters; the Smith chart with single- and double-stub matching; microwave bands; TEM, TE and TM waves in rectangular and circular waveguides; waveguide cavity resonators.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Transmission line equations
    • Smith chart and impedance matching
    • Microwave frequency bands and applications
    • TE and TM field components
    • Rectangular waveguides and modes
    • Circular waveguides
    • Cavity resonators
  2. Unit 2: Microwave Network Theory and Passive Devices

    7 hours

    Z, Y and ABCD matrices of reciprocal networks; the scattering matrix, its significance and properties; S-matrices of E-plane, H-plane and magic tees, directional couplers, isolators and circulators.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Impedance, admittance and ABCD matrices
    • Scattering parameters
    • E-plane, H-plane and magic tees
    • Directional couplers
    • Isolators and circulators
    • S-matrices of tees, couplers, isolators and circulators
  3. Unit 3: Microwave Tubes

    10 hours

    Limits of conventional tubes; O- and M-type tubes; two-cavity and reflex klystrons with bunching and the Applegate diagram; the cylindrical travelling-wave magnetron, Hull cut-off and π mode; the helix TWT.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Limitations of conventional tubes at microwaves
    • Velocity modulation and klystrons
    • Reflex klystron
    • Cavity magnetron
    • Hull cut-off and Hartree conditions
    • Helix travelling wave tube
  4. Unit 4: Measurement Devices and Microwave Measurements

    7 hours

    Slotted line, tunable detector, VSWR and power meters; measuring S-parameters, frequency, power, attenuation, phase shift, VSWR, impedance and cavity Q.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Microwave bench
    • Microwave measurements: VSWR, power and impedance
    • Frequency, attenuation and phase-shift measurement
    • Measurement of cavity Q
  5. Unit 5: Microwave Strip Lines and Microwave Hazards

    7 hours

    Striplines, microstrip, parallel and coplanar strip lines and shielded strip line; hazards of electromagnetic radiation, hazard levels and limits, and protection.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Striplines
    • Microstrip and coplanar lines
    • Microwave radiation hazards

Unit contents are summarised from the official DBATU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Technological University (DBATU).