DBATU Final Year E&TC syllabus

DBATU · Final Year B.Tech Electronics & Telecommunication Engineering · Non-NEP

Fiber Optic Communication

BTETPE702D · Elective I · Semester VII · 4 credits · Continuous assessment 20 + mid-semester 20 + end-semester 60

One of the Elective I options.

  1. Unit 1: Introduction

    7 hours

    The vector nature of light; propagation of light and in a cylindrical dielectric rod; the ray and wave models.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Vector nature and propagation of light
    • Ray and wave theory of propagation
  2. Unit 2: Types of Optical Fibers

    7 hours

    Types of fiber; modal analysis of a step-index fiber; dispersion and attenuation; fabrication and measurement techniques such as OTDR.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Modal analysis of a step-index fiber
    • Attenuation in optical fibers
    • Dispersion in optical fibers
    • Fiber fabrication, splices and connectors
    • OTDR
  3. Unit 3: Optical Sources

    7 hours

    LEDs and lasers; PIN and avalanche photodetectors, responsivity and noise; optical receivers; link design with BER, the quantum limit and power penalties.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Light emitting diodes
    • Laser diodes
    • PIN photodiode
    • Avalanche photodiode
    • Receiver noise and sensitivity
    • Bit error rate, Q function and eye diagram
    • Power penalties and crosstalk
  4. Unit 4: Optical Switches and Optical Amplifiers

    7 hours

    Coupled-mode analysis of directional couplers and electro-optic switches; EDFA and Raman amplifiers; WDM and DWDM systems and WDM networks.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Directional couplers and electro-optic switches
    • Optical amplifiers: EDFA and SOA
    • Raman amplifiers
    • Wavelength division multiplexing
    • WDM network architectures
  5. Unit 5: Nonlinear Effects in Fiber Optic Links

    7 hours

    Nonlinear effects in fiber links; self-phase modulation and group-velocity dispersion; soliton-based communication.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Nonlinear effects in optical fibers
    • Self-phase modulation and group velocity dispersion
    • Soliton-based communication

Unit contents are summarised from the official DBATU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Technological University (DBATU).