DBATU · Final Year B.Tech Electrical Engineering · Non-NEP
Power System Operation and Control
BTEEC702 · Semester VII · 4 credits · Continuous assessment 20 + mid-semester 20 + end-semester 60
Unit 1: Reactive Power Management
6 hoursWhy reactive power is controlled; its production and absorption; methods of voltage control with shunt reactors, series and shunt capacitors, synchronous condensers and static VAR systems.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Production and absorption of reactive power
- Methods of voltage control
- Shunt reactors, series and shunt capacitors
- Synchronous condensers and static VAR systems
Unit 2: Power System Stability
6 hoursSteady-state, transient and dynamic stability; the swing equation; the equal area criterion and its applications; step-by-step solution of the swing equation; factors affecting and methods of improving stability.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Steady state, transient and dynamic stability
- Swing equation
- Equal area criterion
- Step-by-step solution of the swing equation
- Methods to improve stability
Unit 3: Excitation Systems
6 hoursRequirements and elements of an excitation system; types of excitation systems; their control and protective functions.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Excitation system requirements
- Types of excitation systems
- Excitation control and protection
Unit 4: Load Frequency Control
7 hoursLFC of a single-area and a two-area system; automatic voltage control; speed governing mechanism and its model; governor dead band and its effect on automatic generation control.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Load frequency control of an isolated system
- Two-area load frequency control
- Automatic voltage regulator
- Speed governing and turbine models
- Governor dead band and automatic generation control
Unit 5: Economic Operation of Power System
10 hoursLoad division between units in a plant; transmission loss as a function of generation and loss coefficients; unit commitment and its constraints; hydro-thermal scheduling, long and short term, by computer.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Economic load division between units in a plant
- Economic dispatch by Lagrange multipliers
- Penalty factor and B-coefficients
- Unit commitment constraints
- Unit commitment by priority list and dynamic programming
- Hydro-thermal scheduling
Unit contents are summarised from the official DBATU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Technological University (DBATU).