DBATU · Final Year B.Tech Electrical Engineering · Non-NEP
High Voltage Engineering
BTEEC701 · Semester VII · 4 credits · Continuous assessment 20 + mid-semester 20 + end-semester 60
Unit 1: Introduction to High Voltage Engineering
2 hoursElectric field stresses and Poisson's equation; estimating and controlling electric stress; surge voltages, their distribution and control.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Electric field stress and its control
- Surge voltage distribution and control
Unit 2: Conduction and Breakdown in Gases
6 hoursGases as insulation; ionisation processes and Townsend's current growth; Townsend's criterion and breakdown in electronegative gases; time lags; streamer theory and Paschen's law; non-uniform fields, corona, glow and arc discharges.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Ionisation processes in gases
- Townsend's theory of breakdown
- Breakdown in electronegative gases and time lags
- Streamer theory
- Paschen's law
- Corona discharge
Unit 3: Breakdown in Dielectric Materials
8 hoursConduction and breakdown in pure and commercial liquids; intrinsic, electromechanical and thermal breakdown of solids; chemical deterioration, treeing, tracking and internal discharges; composite insulation; insulating materials in transformers, machines, breakers, cables and capacitors.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Breakdown in liquid dielectrics
- Breakdown in solid dielectrics
- Treeing and tracking
- Breakdown in composite insulation
- Insulating materials in power apparatus
Unit 4: Overvoltages due to Lightning and Switching
8 hoursLightning and switching surges and other abnormal conditions; travelling waves on lines, reflection and transmission at junctions; protecting lines against overvoltages; insulation coordination, surge diverters and substation insulation levels.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Lightning phenomenon
- Switching surges
- Travelling waves on transmission lines
- Surge diverters and overvoltage protection
- Insulation coordination
Unit 5: Generation and Measurement of High Voltages and Currents
10 hoursGenerating high DC, power-frequency AC, high-frequency AC and impulse voltages; standard impulse waveshapes; multistage Marx generators and switching surges; impulse currents; measuring high DC, AC and impulse voltages and currents.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Generation of high DC voltages
- Generation of high AC voltages
- Generation of high-frequency AC voltages
- Impulse voltage waveshape
- Marx impulse generator
- Impulse current generation
- Measurement of high DC and AC voltages
- Measurement of impulse voltages
- Measurement of high currents
Unit 6: Non-destructive Testing
6 hoursIEC and IS codes for high voltage tests; non-destructive testing; testing insulators, bushings, isolators, circuit breakers, cables, transformers and surge diverters; layout of high voltage laboratories.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- IEC and IS codes for high voltage tests
- Non-destructive testing of insulation
- Testing of insulators and bushings
- Testing of circuit breakers and transformers
- Testing of cables and surge arresters
- High voltage laboratory layout
Unit contents are summarised from the official DBATU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Technological University (DBATU).