DBATU · Final Year B.Tech Electrical Engineering · Non-NEP
Electrical Utilization
BTEEPE703D · Elective I · Semester VII · 3 credits · Continuous assessment 20 + mid-semester 20 + end-semester 60
One of the Elective I options.
Unit 1: Electrical Heating and Welding
7 hoursAdvantages of electric heating; resistance heating and oven element design; temperature control; arc and induction furnaces; dielectric heating; arc and resistance welding; ultrasonic and laser welding.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Resistance heating and oven design
- Temperature control of resistance ovens
- Arc and induction furnaces
- Dielectric heating
- Arc and resistance welding
- Ultrasonic and laser welding
Unit 2: Electrolytic Processes
6 hoursFaraday's laws of electrolysis; electroplating, anodising and other applications; trends in battery manufacture.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Faraday's laws of electrolysis
- Electroplating, anodising and electro-extraction
- Batteries: charging, discharging and trends
Unit 3: Illumination
7 hoursRequirements of good lighting; light fittings and luminaires; designing indoor, factory, flood and street lighting; calculating illumination at a point; standard illumination levels.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Requirements of good lighting
- Classification of lighting fittings and luminaires
- Factory, flood and street lighting design
- Calculation of illumination at a point
- Standard illumination levels and indoor schemes
Unit 4: Electric Traction Systems
8 hoursElectrical transmission with DC generators and series motors or with three-phase alternators feeding DC or induction traction motors; battery, hybrid and flywheel drives, tramways and trolley buses; characteristics and construction of DC series traction motors.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Ideal traction system and traction systems
- Diesel-electric transmission systems
- Battery, hybrid and flywheel traction drives
- DC series motors for traction
- Traction motors and tractive effort
Unit 5: Train Movement and Braking
7 hoursSpeed–time curves; schedule speed and train resistance; tractive effort, acceleration, energy output and consumption; mechanical versus electric braking: rheostatic, regenerative and magnetic track braking.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Speed-time curves and train movement
- Schedule speed and train resistance
- Tractive effort, energy output and consumption
- Speed control and electric braking in traction
- Regenerative braking and energy saved
Unit contents are summarised from the official DBATU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Technological University (DBATU).