BAMU TY Mechanical syllabus

BAMU · Third Year B.E./B.Tech Mechanical Engineering · NEP 2020

Tribology

MED-357-3 · Elective II · Semester VI · 3 credits · CIA 40 + SEE 60

One of the Elective II options.

All notes for this subject
  1. Module 1: Introduction and Friction

    15 hours

    Tribology in design and industry, lubrication, lubricant properties and additives, bearing terminology, sliding and rolling contact; laws, classes and causes of friction, adhesion and abrasion theories, friction measurement, stick–slip and friction instabilities.

    Examined in the 60-mark end-semester paper

    • Tribology and its importance
    • Lubricants and their properties
    • Friction: laws and theories
    • Friction measurement and stick–slip
  2. Module 2: Wear; Lubrication and Lubricants

    15 hours

    Classification and mechanisms of wear: adhesive, abrasive, corrosive and fretting, friction control and wear prevention; boundary, mixed, fluid-film, hydrostatic and elastohydrodynamic lubrication, lubricant functions, SAE grades and selection.

    Examined in the 60-mark end-semester paper

    • Wear: types and mechanisms
    • Boundary and solid lubrication
    • Elastohydrodynamic lubrication
    • SAE grades and selection of lubricants
  3. Module 3: Hydrodynamic and Hydrostatic Lubrication

    15 hours

    Reynolds equation, journal bearing design, Sommerfeld number, the Raimondi and Boyd method, Petroff's solution and thrust bearings; hydrostatic lubrication, step bearings, squeeze films and bearing materials.

    Examined in the 60-mark end-semester paper

    • Reynolds' equation
    • Long and short journal bearings
    • Raimondi and Boyd charts and the Sommerfeld number
    • Petroff's equation
    • Hydrodynamic thrust bearings
    • Hydrostatic step bearing
    • Squeeze film lubrication

Module contents are summarised from the official BAMU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Marathwada University (BAMU).