BAMU TY Mechanical syllabus

BAMU · Third Year B.E./B.Tech Mechanical Engineering · NEP 2020

Heat Transfer

MED-305 · Semester V · 3 credits · CIA 40 + SEE 60

  1. Module 1: Conduction; Extended Surfaces; Unsteady State Heat Conduction

    15 hours

    Modes and laws of heat transfer, conductivity, the general conduction equation, steady conduction through plane, cylindrical, spherical and composite walls, critical radius of insulation and contact resistance; fins, their efficiency and effectiveness; Biot and Fourier numbers, lumped capacity and Heisler and Gröber charts.

    Examined in the 60-mark end-semester paper

    • Modes of heat transfer and their laws
    • General heat conduction equation
    • Steady conduction through plane walls
    • Conduction through cylinders and spheres
    • Critical radius of insulation
    • Heat transfer from fins
    • Fin efficiency and effectiveness
    • Lumped heat capacity analysis
    • Biot and Fourier numbers and Heisler charts
  2. Module 2: Convection; Condensation and Boiling

    15 hours

    Local and average convection coefficients, hydrodynamic and thermal boundary layers, laminar and turbulent flow; dimensional analysis and correlations for free and forced convection over flat plates and in pipes; pool boiling, critical heat flux and film and dropwise condensation.

    Examined in the 60-mark end-semester paper

    • Convection and boundary layers
    • Dimensionless numbers in convection
    • Forced convection correlations
    • Natural convection
    • Boiling heat transfer
    • Condensation heat transfer
  3. Module 3: Radiation Heat Transfer; Heat Exchangers

    15 hours

    Stefan–Boltzmann, Kirchhoff's, Planck's, Wien's and Lambert's laws, radiation exchange, shields and configuration factors; classification of heat exchangers, fouling, overall coefficient, LMTD for parallel and counter flow with correction factors, and the effectiveness–NTU method.

    Examined in the 60-mark end-semester paper

    • Laws of thermal radiation
    • Shape factors
    • Radiation exchange between surfaces
    • Radiation shields
    • Classification of heat exchangers and fouling
    • LMTD method
    • Effectiveness–NTU method

Module contents are summarised from the official BAMU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Marathwada University (BAMU).