BAMU TY Mechanical syllabus

BAMU · Third Year B.E./B.Tech Mechanical Engineering · NEP 2020

Automatic Control System

MED-353 · Semester VI · 3 credits · CIA 40 + SEE 60

All notes for this subject
  1. Module 1: Representation of Control System Components; Block Diagrams and Signal Flow Graphs

    15 hours

    Need for control, manual versus automatic and open- versus closed-loop systems, feedback and the ideal control system, transfer functions; mathematical models of mechanical, electrical, thermal and fluid components; block diagram reduction, signal flow graphs and Mason's gain formula.

    Examined in the 60-mark end-semester paper

    • Open- and closed-loop control systems
    • Feedback and the generalised control system
    • Transfer functions
    • Mathematical models of mechanical and electrical systems
    • Mathematical models of thermal and fluid systems
    • Block diagram reduction
    • Signal flow graphs and Mason's gain formula
  2. Module 2: Controllers, Electrical Systems; Transient and Steady State Response Analysis

    15 hours

    On-off, P, I and D actions and PI, PD and PID controllers, pneumatic and hydraulic controllers; AC and DC servomotors, stepper motors, servomechanisms and position control; standard test signals, first-order step, ramp and impulse responses, second-order step response, specifications, time constant and damping ratio.

    Examined in the 60-mark end-semester paper

    • On-off, proportional, integral and derivative control
    • PI, PD and PID controllers
    • Pneumatic and hydraulic controllers
    • Servomotors, stepper motors and position control
    • Standard test signals
    • First-order system response
    • Second-order system response and time-domain specifications
  3. Module 3: Frequency Response Analysis; Root Locus Plots and MATLAB Applications

    15 hours

    Stability and Routh's criterion, relative stability, the Nyquist criterion, polar plots, gain and phase margins, Bode plots and stability from them; root locus rules and analysis, and MATLAB for control systems.

    Examined in the 60-mark end-semester paper

    • Routh's stability criterion
    • Polar plots and the Nyquist criterion
    • Bode plots, gain and phase margins
    • Root locus
    • MATLAB for control systems

Module contents are summarised from the official BAMU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Marathwada University (BAMU).