BAMU TY E&TC syllabus

BAMU · Third Year B.E./B.Tech Electronics & Telecommunication Engineering · NEP 2020

VLSI Design

ETC353 · Semester VI · 3 credits · CIA 40 + SEE 60

  1. Module 1: CMOS Technology and Inverter Analysis

    15 hours

    The VLSI design flow, IC fabrication (photolithography, diffusion, ion implantation, twin-tub CMOS), MOS transistor V-I characteristics, threshold voltage, body effect and second-order effects; the CMOS inverter's static characteristics, noise margins, VTC, delay, scaling and power.

    Examined in the 60-mark end-semester paper

    • ASIC design flow
    • CMOS fabrication: photolithography, diffusion, ion implantation and the twin-tub process
    • MOSFET second-order effects
    • CMOS inverter characteristics
    • Power dissipation and power-delay product
    • Technology scaling
  2. Module 2: CMOS Logic Circuit Design

    15 hours

    Static CMOS NAND, NOR and complex gates; stick diagrams and lambda-based layout rules; pass-transistor logic, transmission gates and dynamic (domino, zipper) logic; static and dynamic latches, flip-flops and registers.

    Examined in the 60-mark end-semester paper

    • CMOS combinational logic design
    • Stick diagrams and cell layout
    • Lambda design rules and DRC
    • Latch-up and transmission gates
    • Pass-transistor and dynamic CMOS logic: domino and zipper
    • Static and dynamic latches, flip-flops and registers
  3. Module 3: Subsystem Design and FPGA Architecture

    15 hours

    ROM, SRAM and DRAM cells; ripple-carry and carry-look-ahead adders and multipliers; structural, behavioural and dataflow modelling in VHDL/Verilog; full-custom, semi-custom and standard-cell design and FPGA/CPLD architectures.

    Examined in the 60-mark end-semester paper

    • Semiconductor memory cells: ROM, SRAM and DRAM
    • Adders and multipliers: ripple-carry and carry-look-ahead
    • VHDL entity and architecture
    • Sequential and concurrent statements
    • Full-custom, semi-custom and standard-cell design
    • CPLD architecture
    • FPGA architecture

Module contents are summarised from the official BAMU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Marathwada University (BAMU).