BAMU · Third Year B.E./B.Tech Electronics & Telecommunication Engineering · NEP 2020
Microwave Theory and Techniques
ETC357A · Elective II · Semester VI · 3 credits · CIA 40 + SEE 60
One of the Elective II options.
Module 1: Microwave Network Analysis and Waveguides
15 hoursMaxwell's equations and rectangular waveguides reviewed; circular waveguide TE/TM modes and cut-off; Z, Y and ABCD versus S-parameters, S-matrix properties and multi-port formulation; rectangular and circular cavity resonators and Q.
Examined in the 60-mark end-semester paper
- Circular waveguides
- TE and TM field components
- Impedance, admittance and ABCD matrices
- Scattering parameters
- S-matrices of tees, couplers, isolators and circulators
- Cavity resonators
- Measurement of cavity Q
Module 2: Passive Microwave Components
15 hoursE-plane, H-plane and magic tees, multi-hole and Bethe-hole directional couplers and attenuators; ferrite isolators, circulators and phase shifters on Faraday rotation; microstrip, stripline and coplanar waveguide impedance, effective permittivity and loss.
Examined in the 60-mark end-semester paper
- E-plane, H-plane and magic tees
- Directional couplers
- Waveguide attenuators and phase shifters
- Ferrites and Faraday rotation
- Isolators and circulators
- Microstrip and coplanar lines
- Striplines
Module 3: Microwave Tubes and Solid-State Devices
15 hoursLimits of conventional tubes; the two-cavity klystron, reflex klystron and TWT; magnetrons and the Hull cut-off; tunnel, Gunn, IMPATT, TRAPATT and PIN diodes.
Examined in the 60-mark end-semester paper
- Limitations of conventional tubes at microwaves
- Velocity modulation and klystrons
- Reflex klystron
- Helix travelling wave tube
- Cavity magnetron
- Gunn diode
- IMPATT and TRAPATT diodes
- PIN, tunnel and Schottky diodes
Module contents are summarised from the official BAMU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Marathwada University (BAMU).