BAMU TY E&TC syllabus

BAMU · Third Year B.E./B.Tech Electronics & Telecommunication Engineering · NEP 2020

Introduction to MEMS

ETC359B · Elective III · Semester VI · 3 credits · CIA 40 + SEE 60

One of the Elective III options.

All notes for this subject
  1. Module 1: Overview and Microscaling Engineering

    15 hours

    MEMS and microsystems, their history, smart materials and applications; scaling of geometry, electrostatic and electromagnetic forces, rigid-body dynamics, heat transfer and fluid flow; silicon, silicon compounds, polymers and piezoelectric crystals.

    Examined in the 60-mark end-semester paper

    • Introduction to MEMS and microsystems
    • Smart materials and applications of MEMS
    • Scaling laws in miniaturisation
    • Scaling of electrostatic and electromagnetic forces
    • Scaling in rigid-body dynamics, heat transfer and fluid flow
    • Materials for MEMS: silicon, polymers and piezoelectrics
  2. Module 2: Microfabrication and Etching Processes

    15 hours

    Cleanrooms; oxidation, photolithography, ion implantation and PVD/CVD thin films; bulk micromachining with wet anisotropic/isotropic and reactive-ion etching; surface micromachining with sacrificial layers and stiction; LIGA and micro-packaging.

    Examined in the 60-mark end-semester paper

    • Cleanrooms and MEMS fabrication steps
    • Oxidation, photolithography and ion implantation
    • Thin-film deposition: PVD and CVD
    • Bulk micromachining: wet and dry etching
    • Surface micromachining and stiction
    • LIGA process and micro-packaging
  3. Module 3: Micro-Sensors, Actuators and Specialised Applications

    15 hours

    Modelling and structure of comb-drive and thermal actuators, piezoresistive pressure sensors and piezoelectric accelerometers; RF-MEMS switches, inductors and tunable capacitors; microfluidics, inkjet heads, micro-pumps and lab-on-a-chip.

    Examined in the 60-mark end-semester paper

    • Electrostatic comb-drive and thermal actuators
    • Piezoresistive pressure sensors
    • Piezoelectric accelerometers
    • RF MEMS: switches, inductors and tunable capacitors
    • Microfluidics: micro-pumps and inkjet heads
    • Lab-on-a-chip

Module contents are summarised from the official BAMU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Marathwada University (BAMU).