BAMU TY Electrical syllabus

BAMU · Third Year B.E./B.Tech Electrical Engineering · NEP 2020

Control Systems

PCCT-3 · Semester V · 3 credits · CIA 40 + SEE 60

  1. Module 1: Introduction and Modelling of Control Systems; Time-Domain Analysis

    15 hours

    Open- and closed-loop systems and feedback, modelling electrical networks and translational and rotational mechanical systems, block diagram reduction and signal flow graphs with Mason's gain formula; test signals, first- and second-order responses to step, ramp and impulse, time-domain specifications, steady-state error, and Routh-Hurwitz stability.

    Examined in the 60-mark end-semester paper

    • Open-loop and closed-loop systems
    • Modelling electrical and mechanical systems
    • Block diagram reduction
    • Signal flow graphs and Mason's gain formula
    • Response of second-order systems
    • Time-domain specifications
    • Steady-state error and error coefficients
    • Routh-Hurwitz criterion
  2. Module 2: Root Locus Technique; Frequency-Domain Analysis

    15 hours

    Root locus construction rules, stability margins and gain adjustment; correlation of time and frequency response, resonant peak, resonant frequency and bandwidth, Bode plots with gain and phase margin, polar plots and the Nyquist criterion.

    Examined in the 60-mark end-semester paper

    • Root locus construction
    • Stability from the root locus
    • Frequency-domain specifications
    • Bode plots
    • Gain margin and phase margin
    • Polar plots
    • Nyquist stability criterion
  3. Module 3: Controllers and Compensators; State-Space Analysis

    15 hours

    P, I, D, PI, PD and PID controllers and root-locus and frequency-domain design of lead, lag and lag-lead compensators; state variables and state models, diagonal and canonical forms, solution of state equations, the state transition matrix, controllability and observability.

    Examined in the 60-mark end-semester paper

    • P, PI and PID controllers
    • Lead and lag networks
    • Lag-lead compensation
    • State variables and state-space representation
    • State transition matrix and the Cayley-Hamilton method
    • Controllability and observability

Module contents are summarised from the official BAMU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Marathwada University (BAMU).