BAMU · Third Year B.E./B.Tech Civil Engineering · NEP 2020
Design of R.C.C. Structures
PCCT-1 · Semester VI · 3 credits · CIA 40 + SEE 60
Module 1: Introduction and Design Philosophy; Analysis and Design of Beams
15 hoursProperties of concrete and steel, working stress and limit state methods, characteristic loads and strengths, partial safety factors and IS 456:2000; limit state assumptions and the analysis and design of singly and doubly reinforced beams.
Examined in the 60-mark end-semester paper
- Working stress and limit state methods
- Characteristic loads, strengths and partial safety factors
- Singly reinforced rectangular sections
- Doubly reinforced sections
Module 2: Design of Slabs
15 hoursTypes of slabs; design of one-way slabs and of two-way slabs by moment coefficients; detailing of slab reinforcement.
Examined in the 60-mark end-semester paper
- One-way slabs
- Two-way slabs
- Reinforcement detailing of slabs
Module 3: Design of Columns; Design of Footings
15 hoursAxially and eccentrically loaded short columns and an introduction to long columns; isolated and combined footings, design of square and rectangular isolated footings with checks for bending, shear and punching shear, and detailing.
Examined in the 60-mark end-semester paper
- Short columns under axial load
- Columns with uniaxial and biaxial bending
- Introduction to long columns
- Isolated footings
- Combined footings
Module contents are summarised from the official BAMU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Marathwada University (BAMU).