BAMU SY Mechanical syllabus

BAMU · Second Year B.E./B.Tech Mechanical Engineering · NEP 2020

Strength of Materials

MED 253 · Semester IV · 2 credits · CIA 20 + SEE 30

A 2-credit theory course: CIA 20 + SEE 30.

  1. Module 1: Simple Stresses and Strains; Shear Force and Bending Moment

    10 hours

    Stress, strain, Hooke's law and the elastic moduli, stress–strain diagrams of ductile and brittle materials, bars of varying section, composite bars and thermal stresses; SF and BM diagrams for cantilever, simply supported and overhanging beams under point loads, UDL, UVL and couples.

    Examined in the 30-mark end-semester paper

    • Hooke's law and elastic constants
    • Stress–strain diagrams and factor of safety
    • Bars of varying section and composite bars
    • Thermal stresses in plain and composite bars
    • SFD and BMD for point loads and UDL
    • SFD and BMD for UVL, couples and combined loads
    • Relation between load, shear force and bending moment
  2. Module 2: Bending and Shear Stresses in Beams; Torsion of Circular Shafts

    10 hours

    Theory of simple bending, bending stress distribution, moment of resistance, section modulus and flitched beams; shear stress distribution; torsion equation, solid and hollow shafts, torque transmission and combined bending and torsion.

    Examined in the 30-mark end-semester paper

    • Theory of simple bending and the flexure formula
    • Bending stress distribution and section modulus
    • Flitched beams
    • Shear stress distribution in beams
    • Torsion of circular shafts
    • Power transmission by shafts: strength and rigidity
    • Combined normal and shear stresses
  3. Module 3: Principal Stresses and Strain Energy; Columns and Struts

    10 hours

    Principal planes and stresses, Mohr's circle and theories of failure; strain energy and resilience under various loads; Euler's and Rankine's formulae for different end conditions, slenderness ratio, critical load and factor of safety.

    Examined in the 30-mark end-semester paper

    • Principal stresses and planes
    • Mohr's circle for plane stress
    • Theories of elastic failure
    • Strain energy under gradual, sudden and impact loads
    • Euler's theory of columns and end conditions
    • Rankine's formula

Module contents are summarised from the official BAMU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Marathwada University (BAMU).