BAMU · Second Year B.E./B.Tech Mechanical Engineering · NEP 2020
Engineering Thermodynamics
MED 201 · Semester III · 3 credits · CIA 40 + SEE 60
Module 1: First Law Applied to Flow Processes; Second Law of Thermodynamics
15 hoursFlow work, control volumes and the steady-flow energy equation applied to nozzles, diffusers, throttling valves, turbines, compressors, engines and heat exchangers; limits of the first law and PMM-I; Kelvin–Planck and Clausius statements, heat engines, refrigerators and heat pumps, PMM-II, Carnot's theorem and the thermodynamic temperature scale.
Examined in the 60-mark end-semester paper
- Flow work and non-flow work
- Steady-flow energy equation and its applications
- Heat engines, refrigerators and heat pumps
- Kelvin–Planck and Clausius statements
- Equivalence of the statements and PMM-II
- Carnot cycle and Carnot's theorem
Module 2: Entropy and Availability; Power Cycles
15 hoursClausius theorem and inequality, T-s plots, entropy and irreversibility and the entropy principle; available energy, dead state and second-law efficiency; air-standard Carnot, Otto, Diesel and dual cycles on p-V and T-s planes, efficiency and mean effective pressure, and the Brayton, Atkinson and Ericsson cycles.
Examined in the 60-mark end-semester paper
- Clausius inequality and entropy
- Principle of increase of entropy
- Available energy and availability
- Mean effective pressure and air-standard assumptions
- Otto, Diesel and dual cycles
- Brayton cycle
- Stirling, Ericsson, Lenoir and Atkinson cycles
Module 3: Properties of Steam; Fuels and Combustion
15 hoursPhase change of water at constant pressure, p-v, T-s and h-s diagrams, critical and triple points, steam tables and dryness fraction; fuels and calorific values, combustion equations on mass and volume basis, minimum and excess air, volumetric to mass analysis, flue gas analysis and the Orsat apparatus.
Examined in the 60-mark end-semester paper
- Formation of steam and its properties
- Property diagrams of water
- Steam tables and the Mollier chart
- Dryness fraction and calorimeters
- Fuels and calorific value
- Combustion and enthalpy of formation
- Minimum air, excess air and flue gas analysis
Module contents are summarised from the official BAMU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Marathwada University (BAMU).