BAMU SY E&TC syllabus

BAMU · Second Year B.E./B.Tech Electronics & Telecommunication Engineering · NEP 2020

Electronic Devices & Circuits

ECD-201 · Semester III · 3 credits · CIA 40 + SEE 60

  1. Module 1: DC Power Supply and Its Applications; BJT and Its Applications

    15 hours

    Rectifier, filter and regulator power supplies with PIV, efficiency, ripple factor and TUF; diode clippers, clampers and RC integrator/differentiator wave-shaping; BJT working, characteristics, biasing, Q-point, DC load line, bias stability and the transistor as amplifier and switch in CE, CC and CB.

    Examined in the 60-mark end-semester paper

    • Rectifier and filter circuits: ripple factor, PIV and TUF
    • Diode clippers, clampers and RC wave-shaping circuits
    • BJT characteristics in CE configuration
    • DC load line, Q-point and BJT biasing
  2. Module 2: JFET and MOSFET Applications; Amplifier Types and Frequency Response

    15 hours

    JFET and enhancement/depletion MOSFET structure, characteristics, biasing and use as amplifiers, compared with the BJT; single- and multistage, RC- and transformer-coupled amplifiers, the CE frequency response, cascade amplifiers, the emitter follower and the effect of feedback.

    Examined in the 60-mark end-semester paper

    • JFET characteristics and parameters
    • JFET amplifiers and biasing
    • Enhancement MOSFET: structure and characteristics
    • MOSFET biasing and the DC load line
    • BJT versus MOSFET
    • RC-coupled CE amplifier and its frequency response
    • Feedback topologies and their effects
  3. Module 3: Power Amplifiers and Tuned Amplifiers; Oscillators and Wave-Shaping Circuits

    15 hours

    Class A, B, AB and C power amplifiers, efficiency, complementary-symmetry push-pull stages and distortion; single, double and stagger-tuned amplifiers; the Barkhausen criterion, RC phase-shift, Wien bridge, Hartley, Colpitts, Clapp and crystal oscillators and UJT relaxation oscillators.

    Examined in the 60-mark end-semester paper

    • Classification of power amplifiers
    • Efficiency and power dissipation of power amplifiers
    • Class B push-pull and complementary symmetry amplifiers
    • Barkhausen criterion and types of oscillators
    • RC phase-shift oscillator
    • Wien bridge oscillator
    • Hartley and Colpitts oscillators
    • Crystal oscillator

Module contents are summarised from the official BAMU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Marathwada University (BAMU).