BAMU · Second Year B.E./B.Tech Electrical Engineering · NEP 2020
Power Systems Planning, Operation and Control
PCCT-4 · Honours (Semester IV) · Semester IV · 3 credits · CIA 40 + SEE 60
Only for the Honours degree, open to students with a first-year CGPA of 7.5 or more. An Honours course: only for students taking B.E./B.Tech Honours (7.5 CGPA or more in first year), on top of the regular courses. The syllabus heads Module II's first part "Generation Expansion Planning" but prints transformer design under it.
Module 1: Introduction to Power Systems and Planning; Load Forecasting and Integrated Resource Planning
15 hoursStructure of generation, transmission and distribution, the objectives and types of planning, and reliability indices such as LOLE and EENS; short-, medium- and long-term load forecasting by time series, regression and machine learning, integrated resource planning and the economic, environmental and policy factors in long-term planning.
Examined in the 60-mark end-semester paper
- Power system planning horizons
- Loss of load expectation
- Loss of energy expectation
- Load forecasting methods
- Integrated resource planning
Module 2: Generation Expansion Planning; Transmission System Expansion and Optimisation
15 hoursSub-part A is titled generation expansion planning but prints transformer core, winding, loss and cooling design; transmission planning for reliability and low losses, route selection and right of way, optimisation of transmission expansion with power-flow and stability checks, and planning for intermittent wind and solar.
Examined in the 60-mark end-semester paper
- Generation and transmission expansion planning
- Transmission route selection and optimisation
- Impact of renewable penetration on reliability
Module 3: Power System Operation and Control
15 hoursNormal, alert, emergency and restorative states, centralised and decentralised load dispatch, SCADA and energy management systems, AGC and frequency regulation, economic operation by lambda iteration, reactive power and voltage control, rotor-angle, voltage and frequency stability, and emergency control and blackout restoration.
Examined in the 60-mark end-semester paper
- Power system operating states
- SCADA and energy management systems
- Automatic generation control and frequency regulation
- Economic operation and reactive power control
- Emergency control and blackout restoration
Module contents are summarised from the official BAMU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Marathwada University (BAMU).