BAMU SY Electrical syllabus

BAMU · Second Year B.E./B.Tech Electrical Engineering · NEP 2020

Network Analysis

PCCT-3 · Semester IV · 2 credits · CIA 20 + SEE 30

A 2-credit course: CIA 20 + SEE 30 (1 hour).

  1. Module 1: Network Analysis; RL and RLC Circuits

    10 hours

    Mesh, supermesh, node and supernode analysis, superposition, Thevenin's, Norton's, maximum power transfer and Millman's theorems, network graphs with incidence, tie-set and cut-set matrices; initial conditions, source-free and driven RL and RC circuits, natural and forced response, and over- and under-damped series RLC circuits.

    Examined in the 30-mark end-semester paper

    • Mesh analysis and supermesh
    • Nodal analysis and supernode
    • Thevenin's and Norton's theorems
    • Maximum power transfer theorem
    • Reciprocity and Millman's theorems
    • Graph theory: incidence, loop and cut-set matrices
    • Transient response of RL and RC circuits
    • Transient response of RLC circuits
  2. Module 2: AC Circuits and Series Resonance; Parallel Resonance

    10 hours

    Series and parallel R, L, C, RL, RC and RLC AC circuits; series resonance with impedance, phase, voltage and current against frequency, bandwidth and selectivity; parallel resonance, resistance in both branches, and the uses of series and parallel resonant circuits.

    Examined in the 30-mark end-semester paper

    • AC analysis of series and parallel RLC circuits
    • Series resonance
    • Parallel resonance, bandwidth and Q factor
  3. Module 3: Filters and Attenuators; Two-Port Network Parameters and Functions

    10 hours

    Symmetrical and asymmetrical networks and their properties, the neper and decibel, symmetrical T and pi attenuators; Z, Y, h and ABCD parameters, reciprocity and symmetry conditions, their applications, and Laplace transforms in circuit analysis.

    Examined in the 30-mark end-semester paper

    • Symmetrical and asymmetrical networks
    • Neper, decibel and T and pi attenuators
    • Z, Y and transmission parameters
    • Relationships between two-port parameters
    • Laplace transforms of circuit elements

Module contents are summarised from the official BAMU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Marathwada University (BAMU).