BAMU SY Electrical syllabus

BAMU · Second Year B.E./B.Tech Electrical Engineering · NEP 2020

Electronic Devices and Circuits

PCCT-3 · Semester III · 2 credits · CIA 20 + SEE 30

A 2-credit course: CIA 20 + SEE 30 (1 hour).

  1. Module 1: DC Power Supply and Its Applications; BJT and Its Applications

    10 hours

    Diode power supplies — rectifier, filter and regulator — with PIV, efficiency, ripple factor and TUF, clippers, clampers and RC wave-shaping; BJT structure, characteristics, fixed, collector-to-base and self bias, Q-point and DC load line, bias stability, the transistor as amplifier and switch, and CE, CC and CB circuits.

    Examined in the 30-mark end-semester paper

    • PN junction and Zener diodes
    • Rectifiers, filters and ripple factor
    • Clippers, clampers and RC wave-shaping circuits
    • BJT characteristics
    • BJT biasing, Q-point and bias stability
    • Transistor as an amplifier and a switch
  2. Module 2: JFET and MOSFET Applications; Amplifier Types and Frequency Response

    10 hours

    JFET and MOSFET structure, characteristics, enhancement and depletion types, comparison with the BJT, FET biasing and FET amplifiers; amplifier classification, RC- and transformer-coupled amplifiers, frequency response of a single-stage CE amplifier, cascade amplifiers and the emitter follower.

    Examined in the 30-mark end-semester paper

    • JFET characteristics
    • MOSFET characteristics
    • FET biasing and FET amplifiers
    • Classification of amplifiers and coupling methods
    • Frequency response of a CE amplifier
  3. Module 3: Power and Tuned Amplifiers; Oscillators and Wave-Shaping Circuits

    10 hours

    Class A, B, AB and C power amplifiers, their efficiency, complementary-symmetry and push-pull stages and distortion; the Barkhausen criterion and feedback, RC phase-shift, Wien bridge, Hartley, Colpitts and Clapp oscillators, crystal and UJT relaxation oscillators.

    Examined in the 30-mark end-semester paper

    • Class A, B, AB and C power amplifiers
    • Push-pull and complementary-symmetry amplifiers
    • Barkhausen criterion and feedback
    • RC and LC oscillators
    • Crystal and UJT relaxation oscillators

Module contents are summarised from the official BAMU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Marathwada University (BAMU).