BAMU SY Electrical syllabus

BAMU · Second Year B.E./B.Tech Electrical Engineering · NEP 2020

Electrical Power Transmission and Distribution

PCCT-2 · Semester IV · 2 credits · CIA 20 + SEE 30

A 2-credit course: CIA 20 + SEE 30 (1 hour).

  1. Module 1: Basic Concepts; Electrical Equipment in Substations

    10 hours

    Ring main and radial distribution, choice of conductor, types of load, load and load-duration curves, demand, load and diversity factors, load forecasting and tariffs (residential, commercial, HT, LT and time-of-day); ratings and features of substation transformers, bus-bars, regulators, isolators, reactors, control panels, metering and batteries.

    Examined in the 30-mark end-semester paper

    • Classification and requirements of distribution systems
    • Load curves and load factors
    • Tariff principles
    • Power factor, TOD and kVAh tariffs
    • Substation equipment and their ratings
  2. Module 2: Overhead Line Insulators; Design of Overhead Lines and Underground Cables

    10 hours

    Pin, suspension, shackle and strain insulators, voltage distribution along a string and string efficiency; line supports, conductor spacing and span, sag with equal and unequal supports and with ice and wind loading; cable classification, construction, XLPE cables, insulation resistance, capacitance, dielectric stress, and cable faults and their location.

    Examined in the 30-mark end-semester paper

    • Types of overhead line insulators
    • String efficiency
    • Sag calculation for overhead lines
    • Sag with supports at unequal levels
    • Effect of ice and wind loading
    • Underground cables and dielectric stress
    • Cable faults and their location
  3. Module 3: Constants of Transmission Lines

    10 hours

    Skin, proximity, Ferranti and corona effects; GMR and GMD, inductance of single-phase, three-phase and parallel-circuit lines with equilateral and unsymmetrical spacing; capacitance of single- and three-phase lines with and without the earth's effect and with transposition.

    Examined in the 30-mark end-semester paper

    • Skin and proximity effects
    • Ferranti effect
    • Corona and corona loss
    • GMR and GMD
    • Inductance of a single-phase line
    • Inductance of three-phase lines and transposition
    • Capacitance of three-phase lines
    • Effect of earth on capacitance

Module contents are summarised from the official BAMU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Marathwada University (BAMU).