BAMU SY Electrical syllabus

BAMU · Second Year B.E./B.Tech Electrical Engineering · NEP 2020

Electrical Measuring Techniques

PCCT-2 · Semester III · 2 credits · CIA 20 + SEE 30

A 2-credit course: CIA 20 + SEE 30 (1 hour). The syllabus heads Module III's second part "Measurement of Resistance", but it covers the CRO.

  1. Module 1: Measurement and Instrumentation Theory; Indicating Instruments; Ammeter and Voltmeter Theory

    10 hours

    Static and dynamic characteristics of instruments, calibration and standards, the generalised instrumentation system and classification of instruments; moving-iron and PMMC instruments; extending ammeter and voltmeter ranges with shunts and multipliers, and digital ammeters and voltmeters.

    Examined in the 30-mark end-semester paper

    • Static and dynamic characteristics of instruments
    • Standards and calibration of instruments
    • Classification of measuring instruments
    • Moving-iron instruments
    • PMMC instruments
    • Extending the range of ammeters and voltmeters
  2. Module 2: Measurement of Resistance; AC Bridges; Wattmeters and Energy Meters

    10 hours

    Low, medium and high resistance measurement with Kelvin's double bridge, the ammeter-voltmeter method, megger and earth tester; AC bridge balance with Maxwell's, Anderson and Schering bridges; wattmeter construction, torque equation and errors, and induction, electronic and three-phase energy meters.

    Examined in the 30-mark end-semester paper

    • Kelvin's double bridge
    • Measuring high resistance: loss of charge and megger
    • Earth resistance measurement
    • AC bridge balance equation
    • Maxwell's bridges
    • Schering bridge
    • Dynamometer wattmeter
    • Single-phase induction energy meter
  3. Module 3: Instrument Transformers; Cathode Ray Oscilloscope; Transducers

    10 hours

    CT and PT construction and connection, their advantages for range extension, ratios, burden and ratio and phase-angle errors; dual-trace and dual-beam CROs and measurement of voltage, period, frequency and phase with Lissajous patterns; classification and types of transducers.

    Examined in the 30-mark end-semester paper

    • Current and potential transformers
    • Ratios and burden of instrument transformers
    • Cathode ray oscilloscope and Lissajous patterns
    • Classification and selection of transducers

Module contents are summarised from the official BAMU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Marathwada University (BAMU).