BAMU · Second Year B.E./B.Tech Electrical Engineering · NEP 2020
AC Machines
PCCT-1 · Semester IV · 3 credits · CIA 40 + SEE 60
Module 1: Three-Phase Induction Motor; Equivalent Circuit Analysis of the Induction Motor
15 hoursConstruction and types, torque equation, starting, running and maximum torque, torque-slip characteristics, starters and speed control from the stator and rotor sides; losses, efficiency and power flow, no-load and blocked-rotor tests, equivalent circuit and phasor diagram, the circle diagram, and cogging and crawling.
Examined in the 60-mark end-semester paper
- Construction and rotating magnetic field of induction motors
- Torque equations and torque-slip characteristics
- Starters for three-phase induction motors
- Speed control of induction motors
- Equivalent circuit and phasor diagram of induction motors
- No-load and blocked-rotor tests
- Circle diagram
- Cogging and crawling
Module 2: Single-Phase Induction Motor; Alternator
15 hoursConstruction, working and types of single-phase induction motors (split-phase, capacitor start and run, shaded pole) and double revolving field theory; three-phase alternator construction, EMF equation, winding parameters, armature reaction, synchronous reactance and impedance, equivalent circuit and alternator on load.
Examined in the 60-mark end-semester paper
- Double revolving field theory
- Starting methods and types of single-phase motors
- Construction of synchronous machines
- EMF equation and winding factors
- Armature reaction
- Synchronous reactance and phasor diagram
Module 3: Equivalent Circuit Analysis of the Alternator; Synchronous Motor
15 hoursOC and SC tests, short-circuit ratio, regulation by the EMF, MMF, zero power factor and direct loading methods, losses and efficiency, parallel operation and synchronising, hunting; synchronous motor starting, phasor diagram, effect of excitation, V and inverted V curves, and the synchronous condenser.
Examined in the 60-mark end-semester paper
- Open-circuit and short-circuit tests
- Short-circuit ratio
- EMF and MMF methods of regulation
- Parallel operation of alternators
- Synchronising an alternator
- Hunting
- Starting of synchronous motors
- V curves and inverted V curves
Module contents are summarised from the official BAMU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Marathwada University (BAMU).